Part Details for P6SMBJ85A by Diotec Semiconductor AG
Results Overview of P6SMBJ85A by Diotec Semiconductor AG
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (6 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
P6SMBJ85A Information
P6SMBJ85A by Diotec Semiconductor AG is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for P6SMBJ85A
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
4878-P6SMBJ85ACT-ND
|
DigiKey | TVS DIODE 85VWM 137VC DO214AA Min Qty: 1 Lead time: 2 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
860 In Stock |
|
$0.0425 / $0.3300 | Buy Now |
|
DISTI #
637-P6SMBJ85A
|
Mouser Electronics | ESD Protection Diodes / TVS Diodes TVS, SMB, 150C, 600W, Unidir RoHS: Compliant | 3000 |
|
$0.0460 / $0.3300 | Buy Now |
|
|
Onlinecomponents.com | TVS Diode - SMB - 85V - 600W - Unidirectional RoHS: Compliant | 0 |
|
$0.0373 / $0.0495 | Buy Now |
|
DISTI #
87348806
|
Verical | Diode TVS Single Uni-Dir 85V 600W 2-Pin SMB T/R Min Qty: 835 Package Multiple: 1 | Americas - 1510 |
|
$0.0608 / $0.0839 | Buy Now |
|
DISTI #
P6SMBJ85A-DIO
|
TME | Diode: TVS, 600W, 94.4÷105V, 4.4A, unidirectional, ±5%, SMB, P6SMBJ Min Qty: 10 | 2570 |
|
$0.0445 / $0.0719 | Buy Now |
Part Details for P6SMBJ85A
P6SMBJ85A CAD Models
P6SMBJ85A Part Data Attributes
|
|
P6SMBJ85A
Diotec Semiconductor AG
Buy Now
Datasheet
|
Compare Parts:
P6SMBJ85A
Diotec Semiconductor AG
Trans Voltage Suppressor Diode, 600W, 85V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | DIOTEC SEMICONDUCTOR AG | |
| Part Package Code | DO-214AA | |
| Package Description | SMB, 2 PIN | |
| Pin Count | 2 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Breakdown Voltage-Max | 105 V | |
| Breakdown Voltage-Min | 94.4 V | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JEDEC-95 Code | DO-214AA | |
| JESD-30 Code | R-PDSO-C2 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Peak Rev Power Dis-Max | 600 W | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -50 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Polarity | UNIDIRECTIONAL | |
| Power Dissipation-Max | 5 W | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 85 V | |
| Surface Mount | YES | |
| Technology | AVALANCHE | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | C BEND | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 5 |
Alternate Parts for P6SMBJ85A
This table gives cross-reference parts and alternative options found for P6SMBJ85A. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of P6SMBJ85A, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| P6SMB100A | Vishay Semiconductors | Check for Price | Trans Voltage Suppressor Diode, 600W, 85.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, PLASTIC, SMB, 2 PIN | P6SMBJ85A vs P6SMB100A |
| P6SMB100AHE3/52 | Vishay Semiconductors | Check for Price | DIODE 600 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN, Transient Suppressor | P6SMBJ85A vs P6SMB100AHE3/52 |
| P6SMB100AHE3/52 | Vishay Intertechnologies | Check for Price | Trans Voltage Suppressor Diode, 600W, 85.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, SMB, 2 PIN | P6SMBJ85A vs P6SMB100AHE3/52 |
| P6SMB100AT3G | onsemi | Check for Price | 600 Watt SMB Transient Voltage Suppressor, 100 V, Unidirectional, SMB, 2500-REEL | P6SMBJ85A vs P6SMB100AT3G |
| P6SMB100 | SEMIKRON | Check for Price | Trans Voltage Suppressor Diode, 600W, 81V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, PLASTIC, SMB, 2 PIN | P6SMBJ85A vs P6SMB100 |
| P6SMB100A | SEMIKRON | Check for Price | Trans Voltage Suppressor Diode, 600W, 85.5V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, PLASTIC, SMB, 2 PIN | P6SMBJ85A vs P6SMB100A |
P6SMBJ85A Frequently Asked Questions (FAQ)
-
The recommended footprint and land pattern for P6SMBJ85A can be found in the Diotec Semiconductor AG's application note or in the IPC-7351 standard. It's essential to follow the recommended footprint to ensure proper soldering and to prevent thermal issues.
-
To ensure the reliability of P6SMBJ85A in high-temperature applications, it's crucial to follow the recommended derating curves, ensure proper heat sinking, and avoid exceeding the maximum junction temperature (Tj) of 150°C. Additionally, consider using a thermally conductive material for the PCB and ensure good airflow around the component.
-
The maximum surge current that P6SMBJ85A can handle is not explicitly stated in the datasheet. However, as a general rule, it's recommended to limit the surge current to 2-3 times the maximum rated current (IRM) to prevent damage to the component. In this case, the maximum surge current would be around 150-200 A.
-
Yes, you can use P6SMBJ85A in a parallel configuration to increase the current rating. However, it's essential to ensure that the components are properly matched, and the current sharing is balanced to prevent overheating and reduce the overall reliability. Additionally, consider the increased power dissipation and thermal management requirements.
-
The recommended storage condition for P6SMBJ85A is to store them in a dry, cool place with a relative humidity of 50% or less. Avoid storing them in environments with high humidity, temperature, or exposure to chemicals. It's also recommended to use a moisture barrier bag or a dry pack to store the components.