Part Details for P6SMBJ6.5CA by Diotec Semiconductor AG
Results Overview of P6SMBJ6.5CA by Diotec Semiconductor AG
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
P6SMBJ6.5CA Information
P6SMBJ6.5CA by Diotec Semiconductor AG is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for P6SMBJ6.5CA
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
4878-P6SMBJ6.5CACT-ND
|
DigiKey | TVS DIODE 6.5VWM 11.2V DO214AA Min Qty: 1 Lead time: 8 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) | Temporarily Out of Stock |
|
$0.0425 / $0.3300 | Buy Now |
|
DISTI #
637-P6SMBJ6.5CA
|
Mouser Electronics | ESD Protection Diodes / TVS Diodes TVS, SMB, 150C, 600W, Bidir RoHS: Compliant | 0 |
|
$0.0450 / $0.3300 | Order Now |
|
|
Onlinecomponents.com | TVS Diode - SMB - 6.5V - 600W - Bidirectional RoHS: Compliant | 0 |
|
$0.0373 / $0.0495 | Buy Now |
|
DISTI #
P6SMBJ6.5CA-DIO
|
TME | Diode: TVS, 600W, 7.2÷8V, 53.8A, bidirectional, ±5%, SMB, reel,tape Min Qty: 5 | 1420 |
|
$0.0430 / $0.1498 | Buy Now |
Part Details for P6SMBJ6.5CA
P6SMBJ6.5CA CAD Models
P6SMBJ6.5CA Part Data Attributes
|
|
P6SMBJ6.5CA
Diotec Semiconductor AG
Buy Now
Datasheet
|
Compare Parts:
P6SMBJ6.5CA
Diotec Semiconductor AG
Trans Voltage Suppressor Diode, 600W, 6.5V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | DIOTEC SEMICONDUCTOR AG | |
| Part Package Code | DO-214AA | |
| Package Description | SMB, 2 PIN | |
| Pin Count | 2 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Breakdown Voltage-Max | 8 V | |
| Breakdown Voltage-Min | 7.2 V | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JEDEC-95 Code | DO-214AA | |
| JESD-30 Code | R-PDSO-C2 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Peak Rev Power Dis-Max | 600 W | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -50 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Polarity | BIDIRECTIONAL | |
| Power Dissipation-Max | 5 W | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 6.5 V | |
| Surface Mount | YES | |
| Technology | AVALANCHE | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | C BEND | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 5 |
Alternate Parts for P6SMBJ6.5CA
This table gives cross-reference parts and alternative options found for P6SMBJ6.5CA. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of P6SMBJ6.5CA, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| WS6.5P6SMB-B | Cyg Wayon Circuit Protection Co Ltd | Check for Price | Trans Voltage Suppressor Diode, 600W, 6.5V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN | P6SMBJ6.5CA vs WS6.5P6SMB-B |
| P6SMBJ6.5CA-T3 | Won-Top Electronics Co Ltd | Check for Price | Trans Voltage Suppressor Diode, 600W, 6.5V V(RWM), Bidirectional, 1 Element, Silicon, DO-214AA, PLASTIC, SMB, 2 PIN | P6SMBJ6.5CA vs P6SMBJ6.5CA-T3 |
| SMA6J6.5CA-TR | STMicroelectronics | Check for Price | 600 W TVS in SMA | P6SMBJ6.5CA vs SMA6J6.5CA-TR |
P6SMBJ6.5CA Frequently Asked Questions (FAQ)
-
The recommended footprint and land pattern for P6SMBJ6.5CA can be found in the Diotec Semiconductor AG's application note or in the IPC-7351 standard. It is essential to follow the recommended footprint and land pattern to ensure reliable soldering and to prevent thermal and mechanical stress.
-
To select the correct TVS diode, consider the following factors: voltage rating, power rating, response time, and clamping voltage. Ensure the TVS diode can handle the maximum voltage and power in your application, and that its response time is fast enough to protect your circuit. P6SMBJ6.5CA is a 6.5V TVS diode with a response time of <1ps.
-
A TVS (Transient Voltage Suppressor) diode is designed to protect circuits from high-voltage transients, such as those caused by lightning strikes or electrostatic discharge. A Zener diode is used for voltage regulation and is designed to operate in the reverse-bias region. While both types of diodes can be used for overvoltage protection, TVS diodes are specifically designed for high-voltage transient protection.
-
Yes, P6SMBJ6.5CA is a high-reliability TVS diode suitable for use in demanding applications, such as aerospace, automotive, and industrial control systems. It is manufactured using a high-quality process and is screened to ensure high reliability and low defect rates.
-
To ensure the TVS diode is properly soldered and connected, follow the recommended soldering profile, use a solder with a high melting point, and ensure the diode is properly aligned with the PCB pads. Additionally, verify the diode's polarity and ensure it is connected correctly in the circuit.