Part Details for P6SMB43AT3 by onsemi
Results Overview of P6SMB43AT3 by onsemi
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (8 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
P6SMB43AT3 Information
P6SMB43AT3 by onsemi is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for P6SMB43AT3
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
P6SMB43AT3
|
Avnet Americas | - Tape and Reel (Alt: P6SMB43AT3) RoHS: Not Compliant Min Qty: 2500 Package Multiple: 2500 Lead time: 111 Weeks, 0 Days Container: Reel | 0 |
|
RFQ | |
|
|
Bristol Electronics | 1827 |
|
RFQ | ||
|
|
Bristol Electronics | Min Qty: 17 | 1425 |
|
$0.0900 / $0.3000 | Buy Now |
|
|
Quest Components | TRANSIENT SUPPRESSOR DIODE,SINGLE,UNIDIRECTIONAL,36.8V V(RWM),DO-214AA / SMB | 1140 |
|
$0.0800 / $0.4000 | Buy Now |
|
|
ComSIT USA | Electronic Component RoHS: Not Compliant |
|
|
RFQ |
Part Details for P6SMB43AT3
P6SMB43AT3 CAD Models
P6SMB43AT3 Part Data Attributes
|
|
P6SMB43AT3
onsemi
Buy Now
Datasheet
|
Compare Parts:
P6SMB43AT3
onsemi
600 Watt SMB Transient Voltage Suppressor, 43 V, Unidirectional, SMB, 2500-REEL
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ONSEMI | |
| Part Package Code | DO-214 | |
| Package Description | PLASTIC, CASE 403A-03, SMB, 2 PIN | |
| Pin Count | 2 | |
| Manufacturer Package Code | 403A-03 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Factory Lead Time | 111 Weeks | |
| Samacsys Manufacturer | onsemi | |
| Additional Feature | HIGH RELIABILITY | |
| Breakdown Voltage-Max | 45.2 V | |
| Breakdown Voltage-Min | 40.9 V | |
| Breakdown Voltage-Nom | 43 V | |
| Clamping Voltage-Max | 59.3 V | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JEDEC-95 Code | DO-214AA | |
| JESD-30 Code | R-PDSO-C2 | |
| JESD-609 Code | e0 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Peak Rev Power Dis-Max | 600 W | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 235 | |
| Polarity | UNIDIRECTIONAL | |
| Power Dissipation-Max | 0.55 W | |
| Qualification Status | Not Qualified | |
| Reference Standard | UL RECOGNIZED | |
| Rep Pk Reverse Voltage-Max | 36.8 V | |
| Surface Mount | YES | |
| Technology | ZENER | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | C BEND | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Alternate Parts for P6SMB43AT3
This table gives cross-reference parts and alternative options found for P6SMB43AT3. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of P6SMB43AT3, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SMBJ43.TF | Semtech Corporation | Check for Price | Trans Voltage Suppressor Diode, 600W, Unidirectional, 1 Element, Silicon, DO-214AA, | P6SMB43AT3 vs SMBJ43.TF |
| P6SMB43A | Vishay Intertechnologies | Check for Price | Trans Voltage Suppressor Diode, 36.8V V(RWM), Unidirectional, DO-214AA, SMB, 2 PIN | P6SMB43AT3 vs P6SMB43A |
| P6SMB43A | Motorola Mobility LLC | Check for Price | 600W, UNIDIRECTIONAL, SILICON, TVS DIODE, CASE 403A-03, SMB, 2 PIN | P6SMB43AT3 vs P6SMB43A |
| P6SMB43A-M3/5B | Vishay Semiconductors | Check for Price | 600W,43V 5%,UNIDIR,SMB TVS | P6SMB43AT3 vs P6SMB43A-M3/5B |
| P6SMB43A | Motorola Semiconductor Products | Check for Price | Trans Voltage Suppressor Diode, 600W, 36.8V V(RWM), Unidirectional, 1 Element, Silicon, CASE 403A-03, SMB, 2 PIN | P6SMB43AT3 vs P6SMB43A |
| SMBJP6KE43A | Micro Commercial Components | Check for Price | Trans Voltage Suppressor Diode, 600W, 36.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, SMBJ, 2 PIN | P6SMB43AT3 vs SMBJP6KE43A |
| P6SMB43A-E3/5B | Vishay Intertechnologies | Check for Price | Trans Voltage Suppressor Diode, 600W, 36.8V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, SMB, 2 PIN | P6SMB43AT3 vs P6SMB43A-E3/5B |
| P6SMBJ43 | Diotec Semiconductor AG | Check for Price | Trans Voltage Suppressor Diode, 600W, 43V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN | P6SMB43AT3 vs P6SMBJ43 |
P6SMB43AT3 Frequently Asked Questions (FAQ)
-
The recommended footprint and land pattern for P6SMB43AT3 can be found in the onsemi application note AND8308/D, which provides guidelines for surface mount assembly of SMB packages.
-
To prevent ESD damage, handle P6SMB43AT3 devices with ESD-protective equipment, such as wrist straps, mats, and bags. Ensure that the workspace and tools are grounded, and avoid touching the device pins or leads.
-
The maximum allowable voltage stress on the P6SMB43AT3 during assembly and testing is 50V. Exceeding this voltage may damage the device.
-
While the P6SMB43AT3 is rated for operation up to 150°C, it's essential to consider the derating curves and thermal management when operating in high-temperature environments to ensure reliable operation and prevent thermal runaway.
-
The correct orientation of the P6SMB43AT3 on the PCB can be determined by referencing the pin 1 indicator on the device package, which is usually a dot or a notch. Ensure that pin 1 is aligned with the corresponding pad on the PCB.