-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for OPA336N/250G4 by Texas Instruments
Results Overview of OPA336N/250G4 by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
OPA336N/250G4 Information
OPA336N/250G4 by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for OPA336N/250G4
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
595-OPA336N/250G4
|
Mouser Electronics | Operational Amplifiers - Op Amps Single-Supply MicroP ower CMOS ALT 595-OPA336N/250 RoHS: Compliant | 333 |
|
$1.3100 / $3.9300 | Buy Now |
|
|
Vyrian | Amplifiers | 333 |
|
RFQ |
Part Details for OPA336N/250G4
OPA336N/250G4 CAD Models
OPA336N/250G4 Part Data Attributes
|
|
OPA336N/250G4
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
OPA336N/250G4
Texas Instruments
Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier™ Series 5-SOT-23
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOT-23 | |
| Package Description | GREEN, PLASTIC, SOT-23, 5 PIN | |
| Pin Count | 5 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.00006 µA | |
| Bias Current-Max (IIB) @25C | 0.00001 µA | |
| Common-mode Reject Ratio-Min | 80 dB | |
| Common-mode Reject Ratio-Nom | 90 dB | |
| Frequency Compensation | YES | |
| Input Offset Current-Max (IIO) | 0.00001 µA | |
| Input Offset Voltage-Max | 125 µV | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e4 | |
| Length | 2.9 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LSSOP | |
| Package Equivalence Code | TSOP5/6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.45 mm | |
| Slew Rate-Nom | 0.03 V/us | |
| Supply Current-Max | 0.032 mA | |
| Supply Voltage Limit-Max | 7.5 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 100 | |
| Voltage Gain-Min | 31600 | |
| Wideband | NO | |
| Width | 1.6 mm |
Alternate Parts for OPA336N/250G4
This table gives cross-reference parts and alternative options found for OPA336N/250G4. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of OPA336N/250G4, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| OPA336N-3K | Texas Instruments | Check for Price | OP-AMP, 125uV OFFSET-MAX, 0.1MHz BAND WIDTH, PDSO5, GREEN, PLASTIC, SOT-23, 5 PIN | OPA336N/250G4 vs OPA336N-3K |
| OPA336N/3KG4 | Texas Instruments | Check for Price | Single-Supply, MicroPower CMOS Operational Amplifiers MicroAmplifier™ Series 5-SOT-23 | OPA336N/250G4 vs OPA336N/3KG4 |
| OPA336N-3K | Rochester Electronics LLC | Check for Price | OP-AMP, 125uV OFFSET-MAX, 0.1MHz BAND WIDTH, PDSO5, GREEN, PLASTIC, SOT-23, 5 PIN | OPA336N/250G4 vs OPA336N-3K |
OPA336N/250G4 Frequently Asked Questions (FAQ)
-
Texas Instruments recommends a layout that minimizes parasitic capacitance and inductance, with a solid ground plane and short traces. A 4-layer PCB with a dedicated analog ground plane is recommended. See the TI application note 'AN-1187: PCB Layout for Switching Regulators and Op Amps' for more details.
-
To ensure stability, ensure that the feedback loop has a phase margin of at least 45° and a gain margin of at least 10 dB. Use a compensation capacitor (e.g., 10-100 pF) in parallel with the feedback resistor to improve phase margin. Also, avoid using long feedback traces and minimize parasitic capacitance.
-
The maximum power dissipation of OPA336N is 500 mW. However, this can be limited by the thermal resistance of the package and the PCB. Ensure that the device is properly heat-sinked and that the PCB is designed to dissipate heat efficiently.
-
While OPA336N can be used as a comparator, it is not recommended due to its limited slew rate and bandwidth. Texas Instruments recommends using a dedicated comparator, such as the LM339 or TLV7031, for comparator applications.
-
Use ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins of OPA336N. Ensure that the PCB has a solid ground plane and that all components are properly grounded. Handle the device by the body, not the pins, and use an anti-static wrist strap or mat when handling the device.