Part Details for NE5532N by Philips Semiconductors
Results Overview of NE5532N by Philips Semiconductors
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Industrial Automation
Agriculture Technology
Medical Imaging
Electronic Manufacturing
NE5532N Information
NE5532N by Philips Semiconductors is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for NE5532N
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 159 |
|
RFQ | ||
|
|
Bristol Electronics | 23 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,DIP,8PIN,PLASTIC | 21 |
|
$0.9000 / $1.5000 | Buy Now |
|
|
Chip 1 Exchange | INSTOCK | 1151 |
|
RFQ | |
|
|
Chip 1 Exchange | INSTOCK | 58 |
|
RFQ | |
|
|
Vyrian | Amplifiers | 2653 |
|
RFQ |
Part Details for NE5532N
NE5532N CAD Models
NE5532N Part Data Attributes
|
|
NE5532N
Philips Semiconductors
Buy Now
Datasheet
|
Compare Parts:
NE5532N
Philips Semiconductors
Operational Amplifier, 2 Func, 5000uV Offset-Max, BIPolar, PDIP8,
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | PHILIPS SEMICONDUCTORS | |
| Package Description | DIP-8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Bias Current-Max (IIB) @25C | 0.8 µA | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 5000 µV | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e0 | |
| Low-Offset | NO | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Slew Rate-Nom | 9 V/us | |
| Supply Current-Max | 16 mA | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 10000 | |
| Voltage Gain-Min | 10000 |
Alternate Parts for NE5532N
This table gives cross-reference parts and alternative options found for NE5532N. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of NE5532N, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| NE5532AN | Philips Semiconductors | Check for Price | Operational Amplifier, 2 Func, 5000uV Offset-Max, BIPolar, PDIP8, | NE5532N vs NE5532AN |
| NE5532AN | NXP Semiconductors | Check for Price | IC DUAL OP-AMP, 5000 uV OFFSET-MAX, 10 MHz BAND WIDTH, PDIP8, 0.300 INCH, PLASTIC, DIP-8, Operational Amplifier | NE5532N vs NE5532AN |
| NE5532FE | NXP Semiconductors | Check for Price | IC DUAL OP-AMP, 5000 uV OFFSET-MAX, 10 MHz BAND WIDTH, CDIP8, Operational Amplifier | NE5532N vs NE5532FE |
| NE5532AIP | Texas Instruments | Check for Price | Dual Low-Noise Operational Amplifier 8-PDIP -40 to 85 | NE5532N vs NE5532AIP |
NE5532N Frequently Asked Questions (FAQ)
-
The maximum power supply voltage for the NE5532N is ±18V, but it's recommended to operate within ±15V for optimal performance and to prevent overheating.
-
Yes, the NE5532N can be used as a single-supply op-amp, but it's essential to ensure that the input common-mode voltage range is within the specified limits to maintain optimal performance.
-
The GBP of the NE5532N is 10 MHz. To choose the correct GBP, consider the required bandwidth and gain of your application. A higher GBP allows for higher gains at higher frequencies, but may also increase noise and power consumption.
-
The NE5532N can provide a maximum output current of ±70 mA. Exceeding this limit may cause the op-amp to overheat or become unstable.
-
The NE5532N is rated for operation up to 70°C. While it can tolerate higher temperatures, its performance may degrade, and its lifespan may be reduced. It's essential to ensure proper heat sinking and thermal management in high-temperature applications.