Part Details for MSP101C by knitter-switch
Results Overview of MSP101C by knitter-switch
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Industrial Automation
Agriculture Technology
Medical Imaging
Electronic Manufacturing
MSP101C Information
MSP101C by knitter-switch is a Pushbutton Switch.
Pushbutton Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Part Details for MSP101C
MSP101C CAD Models
MSP101C Part Data Attributes
|
|
MSP101C
knitter-switch
Buy Now
Datasheet
|
Compare Parts:
MSP101C
knitter-switch
Pushbutton Switch, SPST, Momentary, 0.65A, 30VDC, Solder Terminal, Panel Mount-threaded, ROHS COMPLIANT
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | KNITTER-SWITCH | |
| Package Description | ROHS COMPLIANT | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.31 | |
| Samacsys Manufacturer | KNITTER-SWITCH | |
| Actuator Color | RED | |
| Actuator Length | 0.118 inch | |
| Actuator Travel | 2.0066 mm | |
| Actuator Type | BUTTON TYPE | |
| Body Height | 8.8 mm | |
| Body Length or Diameter | 7.4 mm | |
| Bushing Length | 0.335 inch | |
| Bushing Type | M6X0.75 | |
| Center Contact Material | BRASS | |
| Center Contact Plating | SILVER | |
| Contact Current(DC)-Max | 0.65 A | |
| Contact (DC) Max Rating R Load | 0.65A@30VDC | |
| Contact Resistance | 0.02 mΩ | |
| Contact Voltage(DC)-Max | 30 V | |
| Dielectric Withstand Volts | 500VAC V | |
| End Contact Material | BRASS | |
| End Contact Plating | SILVER | |
| Illumination | NON-ILLUMINATED | |
| Insulation Resistance | 500000000 Ω | |
| JESD-609 Code | e4 | |
| Mounting Feature | PANEL MOUNT-THREADED | |
| Operating Temperature-Max | 60 °C | |
| Operating Temperature-Min | -20 °C | |
| Solderability | HAND | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPST | |
| Switch Type | MINIATURE SWITCH | |
| Terminal Finish | Silver (Ag) | |
| Terminal Length | 0.236 inch | |
| Termination Type | SOLDER |
MSP101C Frequently Asked Questions (FAQ)
-
The recommended PCB layout and land pattern for the MSP101C can be found in the Knitter-Switch application note AN-101, which provides detailed guidelines for optimal PCB design and assembly.
-
To ensure reliable switch operation in high-vibration environments, it is recommended to use a switch debouncing circuit and to follow the recommended PCB layout and assembly guidelines. Additionally, consider using a switch with a higher operating force, such as the MSP101C-HF.
-
The maximum allowable current for the MSP101C is 100mA. Exceeding this current may lead to premature switch failure or reduced lifespan.
-
The MSP101C is rated for operation up to 85°C. For high-temperature applications above 85°C, consider using a switch with a higher temperature rating, such as the MSP101C-HT.
-
The MSP101C should be cleaned with a soft, dry brush or a lint-free cloth. Avoid using chemicals, solvents, or liquids, as they may damage the switch or compromise its performance.