Part Details for MSA-0686-TR1 by Broadcom Limited
Results Overview of MSA-0686-TR1 by Broadcom Limited
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
MSA-0686-TR1 Information
MSA-0686-TR1 by Broadcom Limited is an RF/Microwave Amplifier.
RF/Microwave Amplifiers are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Part Details for MSA-0686-TR1
MSA-0686-TR1 CAD Models
MSA-0686-TR1 Part Data Attributes
|
|
MSA-0686-TR1
Broadcom Limited
Buy Now
Datasheet
|
Compare Parts:
MSA-0686-TR1
Broadcom Limited
Wide Band Low Power Amplifier, 0MHz Min, 800MHz Max, 1 Func, BIPolar, PLASTIC PACKAGE-4
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | BROADCOM INC | |
| Package Description | PLASTIC PACKAGE-4 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Additional Feature | HIGH RELIABILITY | |
| Characteristic Impedance | 50 Ω | |
| Construction | COMPONENT | |
| Gain | 16.5 dB | |
| Input Power-Max (CW) | 13 dBm | |
| JESD-609 Code | e0 | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Functions | 1 | |
| Number of Terminals | 4 | |
| Operating Frequency-Max | 800 MHz | |
| Operating Frequency-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | SL,4GW-LD,.085CIR | |
| Power Supplies | 3.5 V | |
| RF/Microwave Device Type | WIDE BAND LOW POWER | |
| Supply Current-Max | 20 mA | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| VSWR-Max | 1.7 |
Alternate Parts for MSA-0686-TR1
This table gives cross-reference parts and alternative options found for MSA-0686-TR1. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MSA-0686-TR1, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MSA-0686-BLK | Hewlett Packard Co | Check for Price | Wide Band Low Power Amplifier, 0MHz Min, 800MHz Max, | MSA-0686-TR1 vs MSA-0686-BLK |
MSA-0686-TR1 Frequently Asked Questions (FAQ)
-
Broadcom provides a reference design guide for PCB layout and thermal management. It's essential to follow the guidelines to ensure optimal performance, especially for high-frequency applications. A good thermal management system, including heat sinks and thermal vias, is crucial to prevent overheating and ensure reliability.
-
The MSA-0686-TR1 has various power-saving modes and configuration options. Engineers should consult the application notes and programming guides to understand how to optimize power consumption for their specific use case. This may involve adjusting the biasing, gain settings, and operating modes to minimize power consumption while maintaining performance.
-
Broadcom recommends using high-quality test and measurement equipment, such as vector network analyzers, signal generators, and oscilloscopes, to accurately characterize the MSA-0686-TR1. Engineers should also consider using calibration kits and adapters to ensure accurate measurements.
-
To ensure EMC and EMI compliance, engineers should follow proper PCB design and layout practices, use shielding and filtering components, and implement adequate grounding and decoupling techniques. Additionally, they should consult the relevant regulatory standards and guidelines, such as FCC and CE, to ensure compliance.
-
Broadcom performs various reliability and qualification tests on the MSA-0686-TR1, including temperature cycling, humidity testing, and mechanical stress testing. Engineers can consult the device's reliability report and qualification data to understand the testing procedures and results.