Part Details for MPXV7002DPT1 by Freescale Semiconductor
Results Overview of MPXV7002DPT1 by Freescale Semiconductor
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Healthcare
Renewable Energy
Robotics and Drones
MPXV7002DPT1 Information
MPXV7002DPT1 by Freescale Semiconductor is a Pressure Sensor.
Pressure Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Part Details for MPXV7002DPT1
MPXV7002DPT1 CAD Models
MPXV7002DPT1 Part Data Attributes
|
|
MPXV7002DPT1
Freescale Semiconductor
Buy Now
Datasheet
|
Compare Parts:
MPXV7002DPT1
Freescale Semiconductor
Pressure Sensor, 5V, -2/2kPa, SOP 8, Port, Reel
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | FREESCALE SEMICONDUCTOR INC | |
| Package Description | PLASTIC, SOP-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Accuracy-Max (%) | 6.25% | |
| Additional Feature | TEMPERATURE COMPENSATED, SIGNAL CONDITIONED | |
| Body Breadth | 12.06 mm | |
| Body Height | 9.65 mm | |
| Body Length or Diameter | 12.06 mm | |
| Housing | PLASTIC | |
| Linearity (%) | 6.25 % | |
| Mounting Feature | SURFACE MOUNT | |
| Offset-Nom | 2.50V | |
| Operating Current-Max | 10 mA | |
| Operating Temperature-Max | 60 °C | |
| Operating Temperature-Min | 10 °C | |
| Output Range | 2.50-4.50V | |
| Output Type | ANALOG VOLTAGE | |
| Package Shape/Style | SQUARE | |
| Port Type | BARBED | |
| Pressure Range-Max | 0.29 Psi | |
| Pressure Range-Min | -0.29 Psi | |
| Pressure Sensing Mode | DIFFERENTIAL | |
| Response Time | 1000 µs | |
| Sensors/Transducers Type | PRESSURE SENSOR,PIEZORESISTIVE | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Surface Mount | YES | |
| Termination Type | SOLDER |
Alternate Parts for MPXV7002DPT1
This table gives cross-reference parts and alternative options found for MPXV7002DPT1. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MPXV7002DPT1, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MPXV7002DPT1 | NXP Semiconductors | $15.4445 | DIFFERENTIAL, PEIZORESISTIVE PRESSURE SENSOR, -.29-0.29Psi, 6.25%, 2.50-4.50V, SQUARE, SURFACE MOUNT | MPXV7002DPT1 vs MPXV7002DPT1 |
| MPXV7002DP | Freescale Semiconductor | Check for Price | Pressure Sensor, 5V, -2/2kPa, SOP 8, Port, Tray | MPXV7002DPT1 vs MPXV7002DP |
MPXV7002DPT1 Frequently Asked Questions (FAQ)
-
A good PCB layout for the MPXV7002DPT1 involves keeping the sensor away from high-current carrying traces, using a solid ground plane, and minimizing the distance between the sensor and the analog-to-digital converter (ADC).
-
Calibration of the MPXV7002DPT1 involves applying known pressures to the sensor and measuring the corresponding output voltages. A calibration curve can then be generated to map output voltages to pressure values.
-
The recommended power-on sequence for the MPXV7002DPT1 is to apply the power supply voltage (VCC) before applying the analog output voltage (VOUT). This ensures that the internal voltage regulator is stable before the sensor begins to operate.
-
To minimize EMI with the MPXV7002DPT1, use a shielded cable to connect the sensor to the ADC, keep the sensor away from high-frequency sources, and use a low-pass filter to filter out high-frequency noise.
-
The MPXV7002DPT1 can measure pressures up to 700 kPa (100 psi). Exceeding this pressure range may damage the sensor.