Part Details for MPSW63RLRA by onsemi
Results Overview of MPSW63RLRA by onsemi
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Audio and Video Systems
MPSW63RLRA Information
MPSW63RLRA by onsemi is a Small Signal Bipolar Transistor.
Small Signal Bipolar Transistors are under the broader part category of Transistors.
A transistor is a small semiconductor device used to amplify, control, or create electrical signals. When selecting a transistor, factors such as voltage, current rating, gain, and power dissipation must be considered, with common types. Read more about Transistors on our Transistors part category page.
Price & Stock for MPSW63RLRA
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Onlinecomponents.com | Trans Darlington PNP 30V 0.5A 3-Pin TO-92 T/R RoHS: Compliant |
2000 In Stock |
|
$0.3900 / $2.2200 | Buy Now |
|
DISTI #
82771767
|
Verical | Trans Darlington PNP 30V 0.5A 1000mW 3-Pin TO-92 T/R Min Qty: 60 Package Multiple: 60 | Americas - 1980 |
|
$0.4572 / $2.7854 | Buy Now |
|
|
Bristol Electronics | 1085 |
|
RFQ | ||
|
|
Quest Components | 2951 |
|
$0.1486 / $0.7430 | Buy Now | |
|
|
Rochester Electronics | Small Signal Bipolar Transistor, 0.5A, PNP, TO-92 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 2302 |
|
$0.0712 / $0.1148 | Buy Now |
|
|
Master Electronics | Trans Darlington PNP 30V 0.5A 3-Pin TO-92 T/R RoHS: Compliant |
2000 In Stock |
|
$0.3900 / $2.2200 | Buy Now |
Part Details for MPSW63RLRA
MPSW63RLRA CAD Models
MPSW63RLRA Part Data Attributes
|
|
MPSW63RLRA
onsemi
Buy Now
Datasheet
|
Compare Parts:
MPSW63RLRA
onsemi
500mA, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92, PLASTIC, TO-226AE, 3 PIN
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ONSEMI | |
| Part Package Code | TO-92 | |
| Package Description | PLASTIC, TO-226AE, 3 PIN | |
| Pin Count | 3 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| Factory Lead Time | 4 Weeks | |
| Collector Current-Max (IC) | 0.5 A | |
| Configuration | DARLINGTON | |
| DC Current Gain-Min (hFE) | 10000 | |
| JEDEC-95 Code | TO-92 | |
| JESD-30 Code | O-PBCY-T3 | |
| JESD-609 Code | e0 | |
| Number of Elements | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature-Max | 150 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | ROUND | |
| Package Style | CYLINDRICAL | |
| Peak Reflow Temperature (Cel) | 235 | |
| Polarity/Channel Type | PNP | |
| Power Dissipation-Max (Abs) | 1 W | |
| Qualification Status | Not Qualified | |
| Surface Mount | NO | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Position | BOTTOM | |
| Transistor Element Material | SILICON | |
| Transition Frequency-Nom (fT) | 125 MHz |
Alternate Parts for MPSW63RLRA
This table gives cross-reference parts and alternative options found for MPSW63RLRA. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MPSW63RLRA, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MPSW63G | onsemi | Check for Price | TRANSISTOR 500 mA, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92, CASE 29-10, TO-226AE, 3 PIN, BIP General Purpose Small Signal | MPSW63RLRA vs MPSW63G |
| MPSW63G | Rochester Electronics LLC | Check for Price | 500mA, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92, CASE 29-10, TO-226AE, 3 PIN | MPSW63RLRA vs MPSW63G |
| MPSW63RLRA | Rochester Electronics LLC | Check for Price | 500mA, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92, PLASTIC, TO-226AE, 3 PIN | MPSW63RLRA vs MPSW63RLRA |
| MPSW63 | onsemi | Check for Price | Small Signal Darlington PNP, TO-92 (TO-226) 1 WATT, 5000-BLKBX | MPSW63RLRA vs MPSW63 |
| MPSW63 | Rochester Electronics LLC | Check for Price | 500mA, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92, CASE 29-10, TO-226AE, 3 PIN | MPSW63RLRA vs MPSW63 |
MPSW63RLRA Frequently Asked Questions (FAQ)
-
A good starting point is to follow the recommended land pattern in the datasheet. Additionally, ensure a solid ground plane, and use thermal vias to connect the exposed pad to the ground plane. Keep the thermal path as short as possible, and use a sufficient number of thermal vias to reduce thermal resistance.
-
Keep the switching node (SW pin) away from sensitive analog circuits. Use a shielded inductor, and orient the inductor to minimize radiation. Place the input and output capacitors near the IC, and use a solid ground plane to reduce radiation. Use a common-mode choke if necessary.
-
A low-ESR ceramic capacitor (X5R or X7R) with a value between 4.7uF to 10uF is recommended. The capacitor should be placed close to the VIN pin and have a low inductance path to the IC.
-
Ensure the EN pin is properly biased high during startup. A pull-up resistor to VIN or a dedicated bias voltage can be used. The EN pin should be driven high before the input voltage reaches the UVLO threshold.
-
A low-ESR ceramic capacitor (X5R or X7R) with a value between 4.7uF to 10uF is recommended. The capacitor should be placed close to the VOUT pin and have a low inductance path to the IC.