Part Details for MP9518GJS-XXXX-Z by Monolithic Power Systems
Results Overview of MP9518GJS-XXXX-Z by Monolithic Power Systems
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MP9518GJS-XXXX-Z Information
MP9518GJS-XXXX-Z by Monolithic Power Systems is a Motion Control Electronic.
Motion Control Electronics are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for MP9518GJS-XXXX-Z
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MP9518GJS-XXXX-Z-ND
|
DigiKey | SINGLE PHASE BLDC MOTOR DRIVER W Lead time: 16 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
Buy Now |
Part Details for MP9518GJS-XXXX-Z
MP9518GJS-XXXX-Z CAD Models
MP9518GJS-XXXX-Z Part Data Attributes
|
|
MP9518GJS-XXXX-Z
Monolithic Power Systems
Buy Now
Datasheet
|
Compare Parts:
MP9518GJS-XXXX-Z
Monolithic Power Systems
Brushless DC Motor Controller,
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MONOLITHIC POWER SYSTEMS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Monolithic Power Systems (MPS) | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
MP9518GJS-XXXX-Z Frequently Asked Questions (FAQ)
-
The maximum input voltage is 24V, but it's recommended to keep it below 20V for optimal performance and reliability.
-
The output voltage can be adjusted by selecting the appropriate resistor values for the FB pin. Refer to the datasheet for the calculation formula and examples.
-
A minimum of 10uF ceramic capacitor is recommended for input decoupling, but the actual value may vary depending on the specific application and input voltage ripple.
-
The device is rated for operation up to 125°C, but the junction temperature should be kept below 115°C for optimal reliability. Ensure proper thermal design and heat sinking for high-temperature applications.
-
Follow the recommended PCB layout guidelines, ensure proper input and output decoupling, and use a stable output capacitor with a low ESR value.