-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for MMBD1701A by onsemi
Results Overview of MMBD1701A by onsemi
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Telecommunications
MMBD1701A Information
MMBD1701A by onsemi is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for MMBD1701A
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MMBD1701A
|
Avnet Americas | - Tape and Reel (Alt: MMBD1701A) RoHS: Not Compliant Min Qty: 3000 Package Multiple: 3000 Lead time: 111 Weeks, 0 Days Container: Reel | 0 |
|
RFQ |
Part Details for MMBD1701A
MMBD1701A CAD Models
MMBD1701A Part Data Attributes
|
|
MMBD1701A
onsemi
Buy Now
Datasheet
|
Compare Parts:
MMBD1701A
onsemi
Rectifier Diode
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ONSEMI | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.70 | |
| Factory Lead Time | 111 Weeks | |
| Samacsys Manufacturer | onsemi | |
| Application | GENERAL PURPOSE | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| JESD-30 Code | R-PDSO-G3 | |
| Non-rep Pk Forward Current-Max | 0.25 A | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature-Max | 150 °C | |
| Output Current-Max | 0.05 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Power Dissipation-Max | 0.35 W | |
| Rep Pk Reverse Voltage-Max | 30 V | |
| Reverse Recovery Time-Max | 0.001 µs | |
| Surface Mount | YES | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL |
Alternate Parts for MMBD1701A
This table gives cross-reference parts and alternative options found for MMBD1701A. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MMBD1701A, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MMBD1701 | onsemi | Check for Price | Rectifier Diode | MMBD1701A vs MMBD1701 |
MMBD1701A Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the MMBD1701A is -55°C to 150°C, but it's recommended to operate within -40°C to 125°C for optimal performance and reliability.
-
To ensure proper biasing, connect the base to a voltage source through a resistor (Rb) and a capacitor (Cb) in parallel. The recommended values are Rb = 1 kΩ and Cb = 10 nF. This helps to stabilize the base voltage and reduce noise.
-
For optimal thermal management, use a copper pour on the PCB to dissipate heat. Keep the component away from heat sources and ensure good airflow. Use a thermal pad or thermal interface material (TIM) to improve heat transfer between the device and the heat sink. A recommended PCB layout is to place the device near the edge of the board, with the heat sink on the opposite side.
-
To protect the MMBD1701A from ESD, handle the device with an anti-static wrist strap or mat. Use ESD-sensitive packaging and storage materials. When handling the device, touch a grounded object or wear an anti-static wrist strap to discharge any static electricity from your body.
-
The recommended soldering conditions for the MMBD1701A are: peak temperature = 260°C, time above 217°C = 10-15 seconds, and time above 183°C = 30-60 seconds. Use a solder with a melting point below 217°C to prevent damage to the device.