Part Details for MM74HC08MX by National Semiconductor Corporation
Results Overview of MM74HC08MX by National Semiconductor Corporation
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Financial Technology (Fintech)
Healthcare
MM74HC08MX Information
MM74HC08MX by National Semiconductor Corporation is a Gate.
Gates are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for MM74HC08MX
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 7476 |
|
RFQ | ||
|
|
Quest Components | IC,LOGIC GATE,QUAD 2-INPUT AND,HC-CMOS,SOP,14PIN,PLASTIC | 10864 |
|
$0.0650 / $0.2000 | Buy Now |
|
|
Vyrian | Logic ICs | 2849 |
|
RFQ |
Part Details for MM74HC08MX
MM74HC08MX CAD Models
MM74HC08MX Part Data Attributes
|
|
MM74HC08MX
National Semiconductor Corporation
Buy Now
Datasheet
|
Compare Parts:
MM74HC08MX
National Semiconductor Corporation
AND Gate, HC/UH Series, 4-Func, 2-Input, CMOS, PDSO14
|
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NATIONAL SEMICONDUCTOR CORP | |
| Package Description | PLASTIC, SO-14 | |
| Reach Compliance Code | unknown | |
| Family | HC/UH | |
| JESD-30 Code | R-PDSO-G14 | |
| Length | 8.65 mm | |
| Load Capacitance (CL) | 50 pF | |
| Logic IC Type | AND GATE | |
| Number of Functions | 4 | |
| Number of Inputs | 2 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Propagation Delay (tpd) | 30 ns | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 3.9 mm |
MM74HC08MX Frequently Asked Questions (FAQ)
-
The maximum operating frequency of the MM74HC08MX is typically around 25 MHz, but it can vary depending on the specific application and operating conditions.
-
To ensure proper operation, the MM74HC08MX should be powered with a stable voltage supply between 2.0V and 6.0V, with a recommended operating voltage of 5.0V. Additionally, decoupling capacitors should be used to filter out noise and ensure stable operation.
-
The input voltage threshold for the MM74HC08MX is typically around 1.5V for a logic high and 0.5V for a logic low, but this can vary depending on the specific operating conditions and temperature.
-
Yes, the MM74HC08MX can be used in a 3.3V system, but the output voltage will be limited to around 3.3V, and the input voltage threshold may be affected. Additionally, the device may not operate at its maximum frequency in a 3.3V system.
-
Unused inputs on the MM74HC08MX should be tied to a logic high or logic low level to prevent floating inputs, which can cause unpredictable behavior. It is recommended to tie unused inputs to VCC or GND through a pull-up or pull-down resistor.