Part Details for MK10DX64VLF5 by Freescale Semiconductor
Results Overview of MK10DX64VLF5 by Freescale Semiconductor
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MK10DX64VLF5 Information
MK10DX64VLF5 by Freescale Semiconductor is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for MK10DX64VLF5
MK10DX64VLF5 CAD Models
MK10DX64VLF5 Part Data Attributes
|
|
MK10DX64VLF5
Freescale Semiconductor
Buy Now
Datasheet
|
Compare Parts:
MK10DX64VLF5
Freescale Semiconductor
Kinetis K 32-bit MCU, ARM Cortex-M4 core, 64KB Flash, 50MHz, QFP 48
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | FREESCALE SEMICONDUCTOR INC | |
| Part Package Code | QFP | |
| Package Description | 7 X 7 MM, LQFP-48 | |
| Pin Count | 48 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 3A991.A.2 | |
| HTS Code | 8542.31.00.01 | |
| Has ADC | YES | |
| Address Bus Width | ||
| Bit Size | 32 | |
| CPU Family | CORTEX-M4 | |
| Clock Frequency-Max | 50 MHz | |
| DAC Channels | YES | |
| DMA Channels | YES | |
| External Data Bus Width | ||
| JESD-30 Code | S-PQFP-G48 | |
| JESD-609 Code | e3 | |
| Length | 7 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of I/O Lines | 33 | |
| Number of Terminals | 48 | |
| On Chip Program ROM Width | 8 | |
| Operating Temperature-Max | 105 °C | |
| Operating Temperature-Min | -40 °C | |
| PWM Channels | YES | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LFQFP | |
| Package Equivalence Code | QFP48,.35SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| RAM (bytes) | 16384 | |
| ROM (words) | 65536 | |
| ROM Programmability | FLASH | |
| Seated Height-Max | 1.6 mm | |
| Speed | 50 MHz | |
| Supply Current-Max | 18.2 mA | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 1.71 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 40 | |
| Width | 7 mm | |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
MK10DX64VLF5 Frequently Asked Questions (FAQ)
-
The maximum operating frequency of the MK10DX64VLF5 is 50 MHz, but it can be overclocked to 60 MHz with a reduced voltage supply.
-
The internal clock source of the MK10DX64VLF5 can be configured using the MCG (Multipurpose Clock Generator) module. The MCG module allows the user to select between the internal reference clock, the external clock, or the PLL (Phase-Locked Loop) clock as the system clock source.
-
The MK10DX64VLF5 has 64 KB of flash memory, and the entire flash memory can be programmed. However, it's recommended to leave some space for the bootloader and other system requirements.
-
The MK10DX64VLF5 has several low-power modes, including Stop, Wait, and VLPR (Very Low Power Run) modes. These modes can be implemented using the SMC (System Management Controller) module and by configuring the clock gates and power modes of the peripherals.
-
Yes, the MK10DX64VLF5 can be used with an external crystal oscillator. The external crystal oscillator can be connected to the XTAL and EXTAL pins of the microcontroller, and the clock source can be selected using the MCG module.