Part Details for MIC5247-1.8BM5 by Microchip Technology Inc
Results Overview of MIC5247-1.8BM5 by Microchip Technology Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
MIC5247-1.8BM5 Information
MIC5247-1.8BM5 by Microchip Technology Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Part Details for MIC5247-1.8BM5
MIC5247-1.8BM5 CAD Models
MIC5247-1.8BM5 Part Data Attributes
|
|
MIC5247-1.8BM5
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MIC5247-1.8BM5
Microchip Technology Inc
Fixed Positive LDO Regulator, 1.8V, CMOS, PDSO5, SOT-23, 5 PIN
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Part Package Code | SOT-23 | |
| Package Description | SOT-23, 5-PIN | |
| Pin Count | 5 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Adjustability | FIXED | |
| Dropout Voltage1-Nom | 0.15 V | |
| Input Voltage Absolute-Max | 7 V | |
| Input Voltage-Max | 6 V | |
| Input Voltage-Min | 2.7 V | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e0 | |
| Length | 2.9 mm | |
| Line Regulation-Max | 0.01782% | |
| Load Regulation-Max | 0.054% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.15 A | |
| Output Voltage1-Max | 1.836 V | |
| Output Voltage1-Min | 1.764 V | |
| Output Voltage1-Nom | 1.8 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LSSOP | |
| Package Equivalence Code | TSOP5/6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 240 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 1.45 mm | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Finish | Tin/Lead (Sn85Pb15) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 2% | |
| Width | 1.6 mm |
Alternate Parts for MIC5247-1.8BM5
This table gives cross-reference parts and alternative options found for MIC5247-1.8BM5. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MIC5247-1.8BM5, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MIC5247-1.8BM5TR | Micrel Inc | Check for Price | Fixed Positive LDO Regulator 1.8V CMOS PDSO5 | MIC5247-1.8BM5 vs MIC5247-1.8BM5TR |
MIC5247-1.8BM5 Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the MIC5247-1.8BM5 is 6V, although it's recommended to keep it below 5.5V for optimal performance and reliability.
-
To ensure stability, make sure to follow the recommended PCB layout guidelines, use a sufficient output capacitor (at least 10uF), and keep the input and output capacitors close to the device. Also, avoid using long traces and minimize the distance between the input and output pins.
-
The minimum input capacitance required for the MIC5247-1.8BM5 is 1uF, but it's recommended to use a 2.2uF or 4.7uF capacitor for optimal performance and stability.
-
The MIC5247-1.8BM5 is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage at higher temperatures to ensure reliability and prevent thermal shutdown.
-
The output voltage tolerance of the MIC5247-1.8BM5 is typically ±2% over the entire operating range. To calculate the output voltage tolerance, multiply the nominal output voltage (1.8V) by the tolerance percentage (2%).