Part Details for MCP4011T-503E/MC by Microchip Technology Inc
Results Overview of MCP4011T-503E/MC by Microchip Technology Inc
- Distributor Offerings: (12 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
MCP4011T-503E/MC Information
MCP4011T-503E/MC by Microchip Technology Inc is a Digital Potentiometer.
Digital Potentiometers are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for MCP4011T-503E/MC
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
56K7024
|
Newark | Ic, digital Potentiometer, cmos, llcc,8Pin, plastic Rohs Compliant: Yes |Microchip MCP4011T-503E/MC RoHS: Compliant Min Qty: 3300 Package Multiple: 1 Date Code: 0 Container: Reel | 0 |
|
$0.5620 | Buy Now |
|
DISTI #
MCP4011T-503E/MCCT-ND
|
DigiKey | IC DGTL POT 50KOHM 64TAP 8DFN Min Qty: 1 Lead time: 7 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
557 In Stock |
|
$0.5300 / $0.6800 | Buy Now |
|
DISTI #
MCP4011T-503E/MC
|
Avnet Americas | Digital Potentiometer, Volatile, 50 kOhm, Single, 64 Steps, ? 150 ppm/?C, 1.8 V to 5.5 V, 8 Pins, PDFN-EP - Tape and Reel (Alt: MCP4011T-503E/MC) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 7 Weeks, 0 Days Container: Reel | 0 |
|
$0.5300 / $0.6800 | Buy Now |
|
DISTI #
579-MCP4011T-503E/MC
|
Mouser Electronics | Digital Potentiometer ICs 50k U/Dsingle 6-bit V POT RoHS: Compliant | 3195 |
|
$0.5300 / $0.6800 | Buy Now |
|
DISTI #
MCP4011T-503E/MC
|
Microchip Technology Inc | Low-cost volatile, Digital Potentiometer, DFN, Projected EOL: 2034-12-08 COO: Malaysia, Thailand ECCN: EAR99 RoHS: Compliant Lead time: 7 Weeks, 0 Days Container: Reel |
0 Alternates Available |
|
$0.4900 / $0.6800 | Buy Now |
|
DISTI #
70568976
|
RS | Digital Potentiometer, ICs 50k U/Dsingle 6-bit V POT Min Qty: 3300 Package Multiple: 1 Lead time: 52 Weeks, 0 Days Container: Bulk | 0 |
|
$0.7800 / $0.9200 | RFQ |
|
|
Onlinecomponents.com | Digital Potentiometer - 50kOhm - 64 Position - Volatile Linear - Automotive - 8-Pin DFN EP - Tape&Reel RoHS: Compliant |
2200 In Stock |
|
$0.4200 / $0.4798 | Buy Now |
|
DISTI #
82748096
|
Verical | Digital Potentiometer 50kOhm 64POS Volatile Linear Automotive AEC-Q100 8-Pin DFN EP T/R RoHS: Compliant Min Qty: 500 Package Multiple: 500 Date Code: 2425 | Americas - 2000 |
|
$0.5626 / $0.6237 | Buy Now |
|
|
NAC | 50k, U/D single, 6-bit V, POT - Package: 8 DFN 2x3x0.9mm T/R RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 | 0 |
|
$0.5500 / $0.6800 | Buy Now |
|
DISTI #
MCP4011T-503E/MC
|
Avnet Silica | Digital Potentiometer Volatile 50 kOhm Single 64 Steps 150 ppmC 18 V to 55 V 8 Pins PDFNEP (Alt: MCP4011T-503E/MC) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 9 Weeks, 0 Days | Silica - 0 |
|
Buy Now |
Part Details for MCP4011T-503E/MC
MCP4011T-503E/MC CAD Models
MCP4011T-503E/MC Part Data Attributes
|
|
MCP4011T-503E/MC
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MCP4011T-503E/MC
Microchip Technology Inc
50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, PLASTIC, DFN-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Part Package Code | DFN | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 7 Weeks | |
| Samacsys Manufacturer | Microchip | |
| Bandwidth-Nom | 0.2 kHz | |
| Control Interface | INCREMENT/DECREMENT | |
| Converter Type | DIGITAL POTENTIOMETER | |
| JESD-30 Code | R-PDSO-N8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Positions | 64 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Equivalence Code | SOLCC8,.12,20 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Resistance Law | LINEAR | |
| Resistance Tolerance-Max | 20% | |
| Resistor Terminal Voltage-Max | 5 V | |
| Resistor Terminal Voltage-Min | ||
| Screening Level | TS 16949 | |
| Seated Height-Max | 1 mm | |
| Supply Current-Max | 0.45 mA | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Coefficient-Nom | 150 ppm/°C | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 40 | |
| Total Resistance-Nom | 50000 Ω | |
| Width | 2 mm |
Alternate Parts for MCP4011T-503E/MC
This table gives cross-reference parts and alternative options found for MCP4011T-503E/MC. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MCP4011T-503E/MC, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MCP4011-503E/SN | Microchip Technology Inc | $0.4634 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 0.150 INCH, PLASTIC, MS-012, SOIC-8 | MCP4011T-503E/MC vs MCP4011-503E/SN |
| MCP4011T-503E/SN | Microchip Technology Inc | $0.5849 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 0.150 INCH, PLASTIC, MS-012, SOIC-8 | MCP4011T-503E/MC vs MCP4011T-503E/SN |
| MCP4021-503E/MS | Microchip Technology Inc | $0.8934 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, PLASTIC, MSOP-8 | MCP4011T-503E/MC vs MCP4021-503E/MS |
| MCP4024T-503E/OT | Microchip Technology Inc | $0.9429 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-503E/MC vs MCP4024T-503E/OT |
| MCP4021T-503E/SN | Microchip Technology Inc | $0.9719 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 0.150 INCH, PLASTIC, MS-012, SOIC-8 | MCP4011T-503E/MC vs MCP4021T-503E/SN |
| MCP4021T-503E/MC | Microchip Technology Inc | $1.0000 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, PLASTIC, DFN-8 | MCP4011T-503E/MC vs MCP4021T-503E/MC |
| MCP4011T-503E/MS | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, PLASTIC, MSOP-8 | MCP4011T-503E/MC vs MCP4011T-503E/MS |
| MCP4021-503E/MC | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 2 X 3 MM, 0.9MM HEIGHT, DFN-8 | MCP4011T-503E/MC vs MCP4021-503E/MC |
| MCP4023-503E/CH | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-503E/MC vs MCP4023-503E/CH |
| MCP4024-503E/OT | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-503E/MC vs MCP4024-503E/OT |
MCP4011T-503E/MC Frequently Asked Questions (FAQ)
-
The maximum operating frequency of the MCP4011T-503E/MC is 1 MHz, which is the maximum clock frequency of the SPI interface.
-
To ensure monotonicity, it is recommended to use a single write operation to set the wiper position, and to avoid using the increment/decrement commands. Additionally, the user should ensure that the device is properly initialized and that the wiper position is set to a known state before making any changes.
-
When power is applied to the MCP4011T-503E/MC, the device will reset to its default state, with the wiper position set to mid-scale (128 taps). The device will also reset its internal registers and disable the SPI interface.
-
The MCP4011T-503E/MC is rated for operation up to 125°C, but the device's performance and reliability may be affected at high temperatures. It is recommended to consult the datasheet and application notes for guidance on using the device in high-temperature environments.
-
The MCP4011T-503E/MC does not have a built-in brown-out detection (BOD) circuit. It is recommended to use an external BOD circuit or a microcontroller with a built-in BOD to detect and respond to brown-out conditions.