Part Details for MCP23008-E/SSVAO by Microchip Technology Inc
Results Overview of MCP23008-E/SSVAO by Microchip Technology Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Audio and Video Systems
MCP23008-E/SSVAO Information
MCP23008-E/SSVAO by Microchip Technology Inc is a Parallel IO Port.
Parallel IO Ports are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for MCP23008-E/SSVAO
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MCP23008-E/SSVAO-ND
|
DigiKey | IC XPNDR 1.7MHZ I2C 20SSOP Lead time: 4 Weeks Container: Tube | Temporarily Out of Stock |
|
Buy Now | |
|
DISTI #
MCP23008-E/SSVAO
|
Microchip Technology Inc | 8-bit I/O Expander with I2C Interface., SSOP, Projected EOL: 2039-02-19 COO: Thailand ECCN: EAR99 RoHS: Compliant Lead time: 5 Weeks, 0 Days Container: Tube |
15209 Alternates Available |
|
$1.0900 / $1.4900 | Buy Now |
|
|
Onlinecomponents.com | RoHS: Compliant | 15209 Factory Stock |
|
$0 | Buy Now |
|
|
Vyrian | Peripheral ICs | 15070 |
|
RFQ |
Part Details for MCP23008-E/SSVAO
MCP23008-E/SSVAO CAD Models
MCP23008-E/SSVAO Part Data Attributes
|
|
MCP23008-E/SSVAO
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MCP23008-E/SSVAO
Microchip Technology Inc
Parallel I/O Port, 8 I/O, CMOS, PDSO20
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Package Description | SSOP-20 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 5 Weeks | |
| Clock Frequency-Max | 10 MHz | |
| External Data Bus Width | ||
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e3 | |
| Length | 7.2 mm | |
| Number of Bits | 8 | |
| Number of I/O Lines | 8 | |
| Number of Ports | 8 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Equivalence Code | SSOP20,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Screening Level | AEC-Q100 | |
| Seated Height-Max | 2 mm | |
| Supply Current-Max | 1 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Width | 5.3 mm | |
| uPs/uCs/Peripheral ICs Type | PARALLEL IO PORT, GENERAL PURPOSE |
MCP23008-E/SSVAO Frequently Asked Questions (FAQ)
-
The maximum frequency of the I2C clock is 400 kHz, but it can be operated at higher frequencies up to 1.7 MHz with some limitations on the bus capacitance and pull-up resistors.
-
Each MCP23008 device has a unique address that can be set using the A0, A1, and A2 pins. You can connect multiple devices to the same I2C bus by setting different addresses for each device.
-
The maximum current that can be sourced or sunk by the GPIO pins is 25 mA. However, it's recommended to limit the current to 10 mA or less to ensure reliable operation.
-
The MCP23008 device can be reset by pulling the RESET pin low for at least 1 ms. This will reset all registers to their default values.
-
The INT pin is an interrupt output that can be used to notify the microcontroller of changes in the input states of the GPIO pins. It can be configured to trigger on rising, falling, or both edges of the input signals.