Part Details for MCP2221A-I/MLVAO by Microchip Technology Inc
Results Overview of MCP2221A-I/MLVAO by Microchip Technology Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Computing and Data Storage
MCP2221A-I/MLVAO Information
MCP2221A-I/MLVAO by Microchip Technology Inc is a Bus Controller.
Bus Controllers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for MCP2221A-I/MLVAO
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 974 |
|
RFQ |
Part Details for MCP2221A-I/MLVAO
MCP2221A-I/MLVAO CAD Models
MCP2221A-I/MLVAO Part Data Attributes
|
|
MCP2221A-I/MLVAO
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MCP2221A-I/MLVAO
Microchip Technology Inc
Microprocessor Circuit, CMOS, PQCC16
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Package Description | QFN-16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 8 Weeks | |
| Bus Compatibility | I2C; SMBUS; UART; USB | |
| Clock Frequency-Max | 12 MHz | |
| Data Transfer Rate-Max | 1.5 MBps | |
| JESD-30 Code | S-PQCC-N16 | |
| JESD-609 Code | e3 | |
| Length | 4 mm | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC16,.16SQ,25 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Screening Level | AEC-Q100 | |
| Seated Height-Max | 1 mm | |
| Supply Current-Max | 15 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | QUAD | |
| Width | 4 mm | |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, UNIVERSAL SERIAL BUS |
Alternate Parts for MCP2221A-I/MLVAO
This table gives cross-reference parts and alternative options found for MCP2221A-I/MLVAO. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MCP2221A-I/MLVAO, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
MCP2221A-I/MLVAO Frequently Asked Questions (FAQ)
-
The maximum cable length supported by the MCP2221A-I/MLVAO is 3 meters (10 feet) for full-speed devices and 1 meter (3.3 feet) for low-speed devices, assuming a good quality cable with proper shielding and termination.
-
No, the MCP2221A-I/MLVAO is not a USB hub. It is a USB-to-UART bridge controller that converts USB signals to UART signals, but it does not support multiple downstream USB ports.
-
The MCP2221A-I/MLVAO does not support 9-bit data transmission. It only supports 7-bit or 8-bit data transmission, as specified in the UART protocol.
-
Yes, the MCP2221A-I/MLVAO can operate with a 5V power supply, but it is recommended to use a 3.3V power supply for optimal performance and to reduce power consumption.
-
The MCP2221A-I/MLVAO supports RTS/CTS flow control, which can be implemented using the RTS and CTS pins. The RTS pin is used to request the transmitter to pause or resume transmission, and the CTS pin is used to indicate when the receiver is ready to receive data.