Part Details for MC74HCT14AD by Motorola Mobility LLC
Results Overview of MC74HCT14AD by Motorola Mobility LLC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Electronic Manufacturing
MC74HCT14AD Information
MC74HCT14AD by Motorola Mobility LLC is a Gate.
Gates are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Part Details for MC74HCT14AD
MC74HCT14AD CAD Models
MC74HCT14AD Part Data Attributes
|
|
MC74HCT14AD
Motorola Mobility LLC
Buy Now
Datasheet
|
Compare Parts:
MC74HCT14AD
Motorola Mobility LLC
HCT SERIES, HEX 1-INPUT INVERT GATE, PDSO14, PLASTIC, SOIC-14
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MOTOROLA INC | |
| Part Package Code | SOIC | |
| Package Description | SOP, | |
| Pin Count | 14 | |
| Reach Compliance Code | unknown | |
| HTS Code | 8542.39.00.01 | |
| Family | HCT | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e0 | |
| Length | 8.65 mm | |
| Load Capacitance (CL) | 50 pF | |
| Logic IC Type | INVERTER | |
| Number of Functions | 6 | |
| Number of Inputs | 1 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Propagation Delay (tpd) | 48 ns | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 4.5 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | MILITARY | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 3.9 mm |
Alternate Parts for MC74HCT14AD
This table gives cross-reference parts and alternative options found for MC74HCT14AD. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MC74HCT14AD, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 933714440653 | NXP Semiconductors | Check for Price | IC HCT SERIES, HEX 1-INPUT INVERT GATE, PDSO14, SOT-108-1, SO-14, Gate | MC74HCT14AD vs 933714440653 |
| MC74HCT04ADD | Freescale Semiconductor | Check for Price | IC,LOGIC GATE,HEX INVERTER,HCT-CMOS,SOP,14PIN,PLASTIC | MC74HCT14AD vs MC74HCT04ADD |
MC74HCT14AD Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for the MC74HCT14AD is 4.5V to 5.5V, with a typical voltage of 5V.
-
To prevent oscillation, ensure that the input signals have a slew rate of at least 10mV/ns and are free from noise and ringing. Also, use a pull-up or pull-down resistor to define the input state when the input signal is not present.
-
The maximum frequency of operation for the MC74HCT14AD is typically around 30MHz, but this can vary depending on the specific application and operating conditions.
-
To prevent reflections and ringing, ensure that the outputs are properly terminated with a load impedance that matches the characteristic impedance of the transmission line. A 50Ω termination is typically recommended.
-
While the MC74HCT14AD is specified for 5V operation, it can be used in a 3.3V system with some limitations. However, the noise immunity and switching speed may be reduced, and the output voltage levels may not be compatible with 3.3V logic.