Part Details for MC33030PG by onsemi
Results Overview of MC33030PG by onsemi
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MC33030PG Information
MC33030PG by onsemi is a Motion Control Electronic.
Motion Control Electronics are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for MC33030PG
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
98H0665
|
Newark | Motor Controller/ Driver, Ic Type:Motor Controller & Driver, Motor Type:Dc Servo, No. Of Outputs:2Outputs, Output Current:100Ma, Output Voltage:-, Ic Case/Package:Dip, No. Of Pins:16Pins, Supply Voltage Min:8V, Qualification:- Rohs Compliant: Yes |Onsemi MC33030PG RoHS: Compliant Min Qty: 175 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
Buy Now |
Part Details for MC33030PG
MC33030PG CAD Models
MC33030PG Part Data Attributes
|
|
MC33030PG
onsemi
Buy Now
Datasheet
|
Compare Parts:
MC33030PG
onsemi
DC Servo Motor Controller/Driver, 16 LEAD PDIP, 25-TUBE
|
| Pbfree Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ON SEMICONDUCTOR | |
| Part Package Code | 16 LEAD PDIP | |
| Package Description | LEAD FREE, PLASTIC, DIP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 648C-04 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | onsemi | |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER | |
| JESD-30 Code | R-PDIP-T16 | |
| JESD-609 Code | e3 | |
| Length | 19.4 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 1 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP16,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.69 mm | |
| Supply Voltage-Max (Vsup) | 16 V | |
| Supply Voltage-Min (Vsup) | 9 V | |
| Supply Voltage-Nom (Vsup) | 14 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 7.62 mm |
Alternate Parts for MC33030PG
This table gives cross-reference parts and alternative options found for MC33030PG. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MC33030PG, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MC33030P | Motorola Mobility LLC | Check for Price | BRUSH DC MOTOR CONTROLLER, 1A, PDIP16, PLASTIC, DIP-16 | MC33030PG vs MC33030P |
MC33030PG Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the MC33030PG is to keep the input and output capacitors close to the device, use a solid ground plane, and keep the high-frequency traces short and away from sensitive analog nodes. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
To ensure stability, make sure to follow the recommended component values and PCB layout, and ensure that the input and output capacitors are of high quality and have low ESR. Also, avoid using long traces and vias, and keep the device away from high-frequency noise sources.
-
The maximum input voltage that the MC33030PG can handle is 18V, but it's recommended to keep the input voltage below 15V to ensure reliable operation and to prevent damage to the device.
-
The MC33030PG is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage at high temperatures to ensure reliable operation. Also, make sure to follow the recommended thermal management practices to prevent overheating.
-
To troubleshoot issues with the MC33030PG, start by checking the input and output voltages, and the output current. Use an oscilloscope to check for oscillations or noise on the output. Also, check the PCB layout and component values to ensure they match the recommended values. If the issue persists, consult the onsemi application note and technical support resources.