Part Details for MBR0540T3 by Motorola Mobility LLC
Results Overview of MBR0540T3 by Motorola Mobility LLC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Renewable Energy
MBR0540T3 Information
MBR0540T3 by Motorola Mobility LLC is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Part Details for MBR0540T3
MBR0540T3 CAD Models
MBR0540T3 Part Data Attributes
|
|
MBR0540T3
Motorola Mobility LLC
Buy Now
Datasheet
|
Compare Parts:
MBR0540T3
Motorola Mobility LLC
0.5A, 40V, SILICON, SIGNAL DIODE
|
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MOTOROLA INC | |
| Package Description | R-PDSO-G2 | |
| Reach Compliance Code | unknown | |
| HTS Code | 8541.10.00.70 | |
| Additional Feature | FREE WHEELING DIODE | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| JESD-30 Code | R-PDSO-G2 | |
| JESD-609 Code | e0 | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Min | -55 °C | |
| Output Current-Max | 0.5 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 40 V | |
| Surface Mount | YES | |
| Technology | SCHOTTKY | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL |
Alternate Parts for MBR0540T3
This table gives cross-reference parts and alternative options found for MBR0540T3. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MBR0540T3, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MBR0530 | Fairchild Semiconductor Corporation | Check for Price | Rectifier Diode, Schottky, 1 Element, 0.5A, 30V V(RRM), Silicon, SOD-123, 2 PIN | MBR0540T3 vs MBR0530 |
MBR0540T3 Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the MBR0540T3 is -55°C to 150°C, although it's recommended to operate within -40°C to 125°C for optimal performance and reliability.
-
To ensure proper biasing, connect the gate to a voltage source through a suitable resistor (e.g., 1 kΩ) and ensure the drain-source voltage (Vds) is within the recommended range (typically 10-40 V). Also, maintain a minimum gate-source voltage (Vgs) of 4 V to ensure the device is fully enhanced.
-
For optimal thermal management, use a heat sink with a thermal resistance of ≤ 10°C/W and ensure good thermal contact between the device and the heat sink. Keep the PCB layout compact, use thick copper traces, and minimize thermal vias to reduce thermal resistance. Also, consider using a thermal pad or thermal interface material to improve heat transfer.
-
To protect the MBR0540T3 from ESD, handle the device with an anti-static wrist strap or mat, and ensure the PCB is designed with ESD protection in mind (e.g., using ESD diodes or resistors). Also, store the device in an anti-static package or bag when not in use.
-
For optimal soldering, use a soldering iron with a temperature range of 200-250°C, and maintain a soldering time of ≤ 10 seconds. Ensure the PCB is clean and free of oxidation, and use a solder with a melting point of ≤ 220°C.