Part Details for MAX993ESD+T by Analog Devices Inc
Results Overview of MAX993ESD+T by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
MAX993ESD+T Information
MAX993ESD+T by Analog Devices Inc is a Comparator.
Comparators are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for MAX993ESD+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX993ESDT
|
Mouser Electronics | Analog Comparators Micropower, Low-Voltage, UCSP/SC70, Rail RoHS: Compliant | 2500 |
|
$3.5300 / $6.6900 | Buy Now |
|
|
Analog Devices Inc | Micropower, Low-Voltage, UCSP/ Min Qty: 1 Package Multiple: 1 | 461 |
|
$3.8125 / $6.6900 | Buy Now |
Part Details for MAX993ESD+T
MAX993ESD+T CAD Models
MAX993ESD+T Part Data Attributes
|
|
MAX993ESD+T
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX993ESD+T
Analog Devices Inc
Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators, 14-SOIC_N-150_MIL, 14 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 14-SOIC_N-150_MIL | |
| Package Description | SO-14 | |
| Pin Count | 14 | |
| Manufacturer Package Code | 14-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2002-04-01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | COMPARATOR | |
| Average Bias Current-Max (IIB) | 0.01 µA | |
| Bias Current-Max (IIB) @25C | 0.01 µA | |
| Input Offset Voltage-Max | 7000 µV | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e3 | |
| Length | 8.65 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | ||
| Neg Supply Voltage-Nom (Vsup) | ||
| Number of Functions | 4 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Type | PUSH-PULL | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Response Time-Nom | 300 ns | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 0.024 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for MAX993ESD+T
This table gives cross-reference parts and alternative options found for MAX993ESD+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX993ESD+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX993ESD+T | Maxim Integrated Products | Check for Price | Comparator, 4 Func, 7000uV Offset-Max, 300ns Response Time, PDSO14, SO-14 | MAX993ESD+T vs MAX993ESD+T |
MAX993ESD+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX993ESD+T involves keeping the input traces as short as possible, using a solid ground plane, and placing the device close to the input signal source. Additionally, it's recommended to use a low-ESR capacitor for the bypass capacitor (C1) and to place it as close to the device as possible.
-
The value of the bypass capacitor (C1) depends on the input frequency and the desired level of noise rejection. A general rule of thumb is to use a capacitor with a value between 10nF to 100nF. For high-frequency applications, a smaller value capacitor (e.g. 10nF) may be used, while for low-frequency applications, a larger value capacitor (e.g. 100nF) may be used.
-
The MAX993ESD+T can handle input voltages up to 12V, but it's recommended to keep the input voltage below 10V to ensure optimal performance and to prevent damage to the device.
-
The MAX993ESD+T has built-in ESD protection that can withstand ESD events up to ±15kV according to the IEC 61000-4-2 standard. The device uses a combination of internal diodes and resistors to clamp the input voltage and prevent damage from ESD events.
-
The typical response time of the MAX993ESD+T to an input overvoltage event is around 1ns to 2ns. This fast response time helps to protect the downstream circuitry from damage caused by overvoltage events.