Part Details for MAX8881EUT33+T by Maxim Integrated Products
Results Overview of MAX8881EUT33+T by Maxim Integrated Products
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Healthcare
MAX8881EUT33+T Information
MAX8881EUT33+T by Maxim Integrated Products is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for MAX8881EUT33+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX8881EUT33+TCT-ND
|
DigiKey | IC REG LINEAR 3.3V 200MA SOT-6 Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
2064 In Stock |
|
$1.3756 / $2.6900 | Buy Now |
|
|
Bristol Electronics | 5166 |
|
RFQ | ||
|
|
Rochester Electronics | MAX8881 - 12V, Ultra-Low-IQ, Low-Dropout Linear Regulators with POK RoHS: Compliant Status: Active Min Qty: 1 | 2000 |
|
$1.0700 / $1.3400 | Buy Now |
|
|
ComSIT USA | LDO Regulator Pos 3.3V 0.2A 6-Pin SOT-23 T/R ECCN: EAR99 RoHS: Compliant |
|
|
RFQ | |
|
|
LCSC | 200mA Fixed 3.3V Positive electrode 12V SOT-23-6 Voltage Regulators - Linear Low Drop Out (LDO) Regulators ROHS | 467 |
|
$0.9864 / $1.6012 | Buy Now |
|
|
Vyrian | Regulators | 1190 |
|
RFQ | |
|
|
Win Source Electronics | LDO Regulator Pos 3.3V 0.2A 6-Pin SOT-23 T/R / IC REG LDO 3.3V 0.2A SOT23-6 | 889 |
|
$1.1178 / $1.6766 | Buy Now |
Part Details for MAX8881EUT33+T
MAX8881EUT33+T CAD Models
MAX8881EUT33+T Part Data Attributes
|
|
MAX8881EUT33+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX8881EUT33+T
Maxim Integrated Products
Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, CMOS, PDSO6, TINY SOT-23, 6 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOT-23 | |
| Package Description | TINY SOT-23, 6 PIN | |
| Pin Count | 6 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Adjustability | FIXED | |
| Dropout Voltage1-Max | 0.2 V | |
| Dropout Voltage1-Nom | 0.1 V | |
| Input Voltage Absolute-Max | 14 V | |
| Input Voltage-Max | 12 V | |
| Input Voltage-Min | 4.3 V | |
| JESD-30 Code | R-PDSO-G6 | |
| JESD-609 Code | e4 | |
| Length | 2.9 mm | |
| Line Regulation-Max | 0.0127% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 6 | |
| Operating Temperature TJ-Max | 150 °C | |
| Output Current1-Max | 0.2 A | |
| Output Voltage1-Max | 3.399 V | |
| Output Voltage1-Min | 3.201 V | |
| Output Voltage1-Nom | 3.3 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LSSOP | |
| Package Equivalence Code | TSOP6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 1.45 mm | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 3% | |
| Width | 1.625 mm |
Alternate Parts for MAX8881EUT33+T
This table gives cross-reference parts and alternative options found for MAX8881EUT33+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX8881EUT33+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX8881EUT33+T | Analog Devices Inc | $1.7814 | 12V, Ultra-Low-IQ, Low-Dropout Linear Regulators with POK, 6-SOT_23-N/A, 6 Pins, -40 to 85C | MAX8881EUT33+T vs MAX8881EUT33+T |
| MAX8881EUT33 | Maxim Integrated Products | Check for Price | ADJUSTABLE POSITIVE LDO REGULATOR, | MAX8881EUT33+T vs MAX8881EUT33 |
MAX8881EUT33+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX8881EUT33+T involves keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
To ensure the stability of the output voltage, it is essential to use the recommended output capacitor value and type, and to ensure that the output capacitor is placed close to the IC. Additionally, the input voltage should be stable and within the recommended range.
-
The MAX8881EUT33+T can handle input voltages up to 5.5V, but it is recommended to operate within the recommended input voltage range of 2.7V to 5.5V for optimal performance and reliability.
-
The MAX8881EUT33+T is rated for operation up to 125°C, but it is recommended to derate the output current and input voltage at high temperatures to ensure reliability and prevent overheating.
-
To troubleshoot issues with the MAX8881EUT33+T, check the input voltage, output capacitor value and type, and PCB layout. Ensure that the IC is properly soldered and that there are no shorts or opens on the PCB. Use a thermal camera or thermometer to check for overheating, and use an oscilloscope to check for output voltage stability.