Part Details for MAX6618AUB+ by Analog Devices Inc
Results Overview of MAX6618AUB+ by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX6618AUB+ Information
MAX6618AUB+ by Analog Devices Inc is an Other Interface IC.
Other Interface ICs are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX6618AUB+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX6618AUB
|
Mouser Electronics | Interface - Specialized PECI-to-IC Translator RoHS: Compliant | 100 |
|
$3.3800 / $7.5200 | Buy Now |
|
|
Analog Devices Inc | PECI-to-I²C Translator Package Multiple: 1 | 0 |
|
$2.3300 / $6.1800 | Buy Now |
Part Details for MAX6618AUB+
MAX6618AUB+ CAD Models
MAX6618AUB+ Part Data Attributes
|
|
MAX6618AUB+
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX6618AUB+
Analog Devices Inc
PECI-to-I<sup>2</sup>C Translator, 10-MINI_SO-N/A, 10 Pins
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 10-MINI_SO-N/A | |
| Package Description | ROHS COMPLIANT, MO-187BA, SOP-10 | |
| Pin Count | 10 | |
| Manufacturer Package Code | 10-MINI_SO-N/A | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2007-02-07 | |
| Samacsys Manufacturer | Analog Devices | |
| Interface IC Type | INTERFACE CIRCUIT | |
| JESD-30 Code | S-PDSO-G10 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 10 | |
| Operating Temperature-Max | 120 °C | |
| Operating Temperature-Min | -20 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP10,.19,20 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | OTHER | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3 mm |
Alternate Parts for MAX6618AUB+
This table gives cross-reference parts and alternative options found for MAX6618AUB+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX6618AUB+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX6618AUB+TG126 | Maxim Integrated Products | Check for Price | Interface Circuit, CMOS, PDSO10, ROHS COMPLIANT, SOP-10 | MAX6618AUB+ vs MAX6618AUB+TG126 |
MAX6618AUB+ Frequently Asked Questions (FAQ)
-
For optimal thermal performance, it is recommended to use a 4-layer PCB with a solid ground plane, and to place the device near a thermal pad or a heat sink. The datasheet provides a recommended PCB layout, but it's also recommended to consult with a thermal expert or use thermal simulation tools to optimize the design.
-
To ensure accurate temperature measurement in a noisy environment, it is recommended to use a low-pass filter or a shielded cable to connect the sensor to the MAX6618AUB+. Additionally, the device has a built-in noise filter that can be enabled by setting the NFILT pin high. It's also recommended to follow proper PCB layout and grounding practices to minimize noise coupling.
-
The maximum cable length for the remote temperature sensor depends on the specific application and the type of cable used. As a general rule, the cable length should be kept as short as possible to minimize noise and signal degradation. The datasheet recommends a maximum cable length of 10 meters, but this can be extended with the use of a repeater or a buffer amplifier.
-
The MAX6618AUB+ has a built-in calibration mechanism that allows for high accuracy temperature measurement. To calibrate the sensor, the user needs to connect the sensor to a known temperature source and then use the CAL pin to set the calibration voltage. The datasheet provides a detailed calibration procedure, and it's also recommended to consult with a temperature measurement expert or use a calibration software tool.
-
The power-on reset (POR) timing for the MAX6618AUB+ is typically around 10ms, but this can vary depending on the specific application and the power supply ramp-up time. The datasheet provides a detailed POR timing diagram, and it's also recommended to consult with a power management expert or use a simulation tool to optimize the design.