-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for MAX489ESD+ by Analog Devices Inc
Results Overview of MAX489ESD+ by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (9 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Consumer Electronics
Internet of Things (IoT)
Audio and Video Systems
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
MAX489ESD+ Information
MAX489ESD+ by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX489ESD+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
78Y4944
|
Newark | Txrx, Rs422/485, 250Kbps, 85Degc/Nsoic14, Ic Type:Rs422/Rs485 Transceiver, No. Of Receivers:1Receivers, No. Of Transmitters:1, Communication Mode:Full Duplex, Data Rate Max:250Kbps, Supply Voltage Min:4.75V, Ic Case/Package:Nsoicrohs Compliant: Yes |Analog Devices MAX489ESD+ RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 48 |
|
$3.2200 | Buy Now |
|
DISTI #
700-MAX489ESD
|
Mouser Electronics | RS-422/RS-485 Interface IC Low-Power, Slew-Rate-Limited RS-485/RS-4 RoHS: Compliant | 679 |
|
$3.5300 / $5.4300 | Buy Now |
|
|
Analog Devices Inc | Low-Power, Slew-Rate-Limited R Package Multiple: 1 | 2364 |
|
$2.5490 / $4.8450 | Buy Now |
|
DISTI #
MAX489ESD+
|
TME | IC: interface, transceiver, full duplex,RS422,RS485, 250kbps Min Qty: 1 | 80 |
|
$3.4600 / $5.5100 | Buy Now |
Part Details for MAX489ESD+
MAX489ESD+ CAD Models
MAX489ESD+ Part Data Attributes
|
|
MAX489ESD+
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX489ESD+
Analog Devices Inc
Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers, 14-SOIC_N-150_MIL, 14 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 14-SOIC_N-150_MIL | |
| Package Description | 0.150 INCH, SOIC-14 | |
| Pin Count | 14 | |
| Manufacturer Package Code | 14-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2000-01-13 | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000001 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e3 | |
| Length | 8.65 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Characteristics | 3-STATE | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 2000 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 0.25 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 2000 ns | |
| Width | 3.9 mm |
Alternate Parts for MAX489ESD+
This table gives cross-reference parts and alternative options found for MAX489ESD+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX489ESD+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX489CSD+ | Maxim Integrated Products | $1.5925 | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO14, 0.150 INCH, SOIC-14 | MAX489ESD+ vs MAX489CSD+ |
| MAX489ECSD+ | Maxim Integrated Products | $3.0972 | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO14, 0.150 INCH, LEAD FREE, MS-012B, SOIC-14 | MAX489ESD+ vs MAX489ECSD+ |
| ADM489ARZ-REEL7 | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE) | MAX489ESD+ vs ADM489ARZ-REEL7 |
| MAX489EESD | Rochester Electronics LLC | Check for Price | LINE TRANSCEIVER, PDSO14, 0.150 INCH, MS-012B, SOIC-14 | MAX489ESD+ vs MAX489EESD |
| MAX489CSD+T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO14, 0.150 INCH, SOIC-14 | MAX489ESD+ vs MAX489CSD+T |
| ADM489AR-REEL | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE) | MAX489ESD+ vs ADM489AR-REEL |
| ADM489ARZ-REEL | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE) | MAX489ESD+ vs ADM489ARZ-REEL |
| ADM489AR | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE) | MAX489ESD+ vs ADM489AR |
| ADM489AR-REEL7 | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE) | MAX489ESD+ vs ADM489AR-REEL7 |
MAX489ESD+ Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX489ESD+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the signal sources. Additionally, using a shielded enclosure and minimizing the length of the signal traces can help reduce EMI and noise.
-
Proper termination for high-speed signals involves using a termination resistor that matches the impedance of the transmission line. For the MAX489ESD+, a 50Ω termination resistor is recommended. Additionally, the termination resistor should be placed as close to the device as possible to minimize signal reflections.
-
The maximum cable length supported by the MAX489ESD+ depends on the signal frequency and the type of cable used. As a general rule, the maximum cable length is limited by the signal attenuation and distortion. For high-speed signals, a maximum cable length of 1-2 meters is recommended.
-
Hot swapping with the MAX489ESD+ requires careful consideration of the power sequencing and signal integrity. It is recommended to use a hot-swap controller that can handle the power sequencing and signal switching. Additionally, the device should be designed to handle the inrush current and voltage transients during hot swapping.
-
The recommended power supply decoupling for the MAX489ESD+ involves using a combination of ceramic and electrolytic capacitors. A 0.1μF ceramic capacitor should be placed as close to the device as possible, and a 10μF electrolytic capacitor should be placed further away from the device. This helps to filter out high-frequency noise and provide a stable power supply.