Part Details for MAX485EESA by Maxim Integrated Products
Results Overview of MAX485EESA by Maxim Integrated Products
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (10 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Industrial Automation
Computing and Data Storage
Healthcare
Energy and Power Systems
Medical Imaging
Renewable Energy
Entertainment and Gaming
Communication and Networking
Robotics and Drones
MAX485EESA Information
MAX485EESA by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX485EESA
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | Min Qty: 1 | 7800 |
|
$2.1123 / $5.1520 | Buy Now |
|
|
Quest Components | 6240 |
|
$2.4150 / $6.9000 | Buy Now | |
|
|
Quest Components | 48 |
|
$4.0480 / $6.0720 | Buy Now | |
|
|
Rochester Electronics | MAX485 Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceiver RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 1477 |
|
$2.1400 / $2.6800 | Buy Now |
|
|
ComSIT USA | Electronic Component RoHS: Compliant |
|
|
RFQ | |
|
|
Vyrian | Interface ICs | 1543 |
|
RFQ | |
|
|
Win Source Electronics | IC TXRX RS485/RS422 8-SOIC | 50000 |
|
$0.8500 / $1.0979 | Buy Now |
Part Details for MAX485EESA
MAX485EESA CAD Models
MAX485EESA Part Data Attributes
|
|
MAX485EESA
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX485EESA
Maxim Integrated Products
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, 0.150 INCH, MS-012A, SOIC-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, MS-012A, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 4 Weeks | |
| Additional Feature | COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.001 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 245 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 0.9 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Transmit Delay-Max | 60 ns | |
| Width | 3.9 mm |
Alternate Parts for MAX485EESA
This table gives cross-reference parts and alternative options found for MAX485EESA. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX485EESA, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1485CS8#TRPBF | Analog Devices Inc | $4.0615 | Differential Bus Transceiver | MAX485EESA vs LTC1485CS8#TRPBF |
| LMS1485IM | National Semiconductor Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 | MAX485EESA vs LMS1485IM |
| ADM1485JR | Analog Devices Inc | Check for Price | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | MAX485EESA vs ADM1485JR |
| MAX485CSA-T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SOIC-8 | MAX485EESA vs MAX485CSA-T |
| MAX1487ECSA+T | Analog Devices Inc | Check for Price | ±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | MAX485EESA vs MAX1487ECSA+T |
| SN75176BD | Texas Instruments | Check for Price | Differential bus transceiver 8-SOIC 0 to 70 | MAX485EESA vs SN75176BD |
| MAX3085CSA | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SOP-8 | MAX485EESA vs MAX3085CSA |
| DS75176BM | Rochester Electronics LLC | Check for Price | Line Transceiver, | MAX485EESA vs DS75176BM |
| THVD1450D | Texas Instruments | Check for Price | 3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection 8-SOIC -40 to 125 | MAX485EESA vs THVD1450D |
| LTC1485CS8#TR | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 | MAX485EESA vs LTC1485CS8#TR |
MAX485EESA Frequently Asked Questions (FAQ)
-
The maximum cable length supported by the MAX485EESA is approximately 4000 feet (1219 meters) at a data rate of 10 kbps. However, this length can vary depending on the specific application, cable quality, and noise environment.
-
To ensure reliable communication in noisy environments, it is recommended to use a shielded twisted-pair cable, keep the cable length as short as possible, and use a common-mode choke or ferrite bead to filter out electromagnetic interference (EMI). Additionally, consider using a transceiver with built-in noise filtering and slew-rate limiting, such as the MAX485EESA.
-
The MAX485EESA is a enhanced version of the MAX485. The main differences are that the MAX485EESA has a higher data rate (up to 10 Mbps), a lower supply current (65 mA), and a wider operating temperature range (-40°C to +85°C). The MAX485EESA also has improved ESD protection and a reduced jitter specification.
-
The MAX485EESA can be easily interfaced with a microcontroller using a UART (Universal Asynchronous Receiver-Transmitter) interface. The MAX485EESA's transmit (TX) and receive (RX) pins are connected to the microcontroller's UART TX and RX pins, respectively. The microcontroller's UART should be configured to match the baud rate, data bits, parity, and stop bits of the MAX485EESA.
-
The enable (EN) pin is used to enable or disable the MAX485EESA's transmitter. When the EN pin is high, the transmitter is enabled, and when it is low, the transmitter is disabled. This pin can be used to control the transmitter's power consumption or to implement a half-duplex communication protocol.