-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for MAX481ECSA+ by Analog Devices Inc
Results Overview of MAX481ECSA+ by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (10 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX481ECSA+ Information
MAX481ECSA+ by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX481ECSA+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX481ECSA
|
Mouser Electronics | RS-422/RS-485 Interface IC 15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers RoHS: Compliant | 488 |
|
$3.1600 / $5.8300 | Buy Now |
|
|
Analog Devices Inc | ±15kV ESD-Protected, Slew-Rate Package Multiple: 1 | 128 |
|
$3.2833 / $5.8300 | Buy Now |
|
DISTI #
MAX481ECSA+
|
TME | IC: interface, transceiver, half duplex,RS422,RS485, 2.5Mbps, SO8 Min Qty: 1 | 7 |
|
$4.1500 / $5.1800 | Buy Now |
Part Details for MAX481ECSA+
MAX481ECSA+ CAD Models
MAX481ECSA+ Part Data Attributes
|
|
MAX481ECSA+
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX481ECSA+
Analog Devices Inc
±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 8-SOIC_N-150_MIL | |
| Package Description | 0.150 INCH, LEAD FREE, MS-012A, SOIC-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 8-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 1995-09-23 | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.001 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 1.5 V | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 0.9 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 60 ns | |
| Width | 3.9 mm |
Alternate Parts for MAX481ECSA+
This table gives cross-reference parts and alternative options found for MAX481ECSA+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX481ECSA+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ISL8485ECBZ | Renesas Electronics Corporation | $1.0689 | ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers, SOICN, /Tube | MAX481ECSA+ vs ISL8485ECBZ |
| ADM1485ARZ-REEL7 | Analog Devices Inc | $2.7802 | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | MAX481ECSA+ vs ADM1485ARZ-REEL7 |
| MAX1487CSA+T | Analog Devices Inc | $2.8420 | Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | MAX481ECSA+ vs MAX1487CSA+T |
| LTC1487CS8#TRPBF | Analog Devices Inc | $3.8052 | Ultra-Low Power RS485 with Low EMI, Shutdown and High Input Impedance | MAX481ECSA+ vs LTC1487CS8#TRPBF |
| MAX3082ECSA-T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8, SO-8 | MAX481ECSA+ vs MAX3082ECSA-T |
| MAX481EESA-T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, 0.150 INCH, MS-012A, SOIC-8 | MAX481ECSA+ vs MAX481EESA-T |
| MAX481EESA+T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, 0.150 INCH, LEAD FREE, MS-012A, SOIC-8 | MAX481ECSA+ vs MAX481EESA+T |
| LMS1485IM/NOPB | National Semiconductor Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 | MAX481ECSA+ vs LMS1485IM/NOPB |
| MAX3085CSA | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SOP-8 | MAX481ECSA+ vs MAX3085CSA |
| DS75176BMX/NOPB | Texas Instruments | Check for Price | Multipoint RS-485/RS-422 Transceivers 8-SOIC 0 to 70 | MAX481ECSA+ vs DS75176BMX/NOPB |
MAX481ECSA+ Frequently Asked Questions (FAQ)
-
A good layout and routing practice for the MAX481ECSA+ is to keep the transmitter and receiver sections separate, use a ground plane, and keep the signal traces short and away from noise sources. Additionally, use a common-mode choke or ferrite bead to filter out high-frequency noise.
-
To ensure reliable communication over long cables, use a cable with a characteristic impedance of 120Ω, keep the cable length as short as possible, and use a termination resistor at the receiving end. Also, consider using a repeater or a line driver to boost the signal.
-
The maximum cable length supported by the MAX481ECSA+ depends on the data rate and the cable characteristics. As a general rule, the maximum cable length is around 1000 feet (305 meters) at a data rate of 250 kbps. However, this can be extended to several kilometers using repeaters or line drivers.
-
To protect the MAX481ECSA+ from electrical overstress and surge events, use TVS diodes or surge protectors on the input lines, and consider adding a fuse or a current-limiting resistor to prevent overcurrent conditions. Also, ensure that the device is operated within its recommended operating conditions.
-
The typical power consumption of the MAX481ECSA+ is around 10mA to 20mA, depending on the operating mode and the data rate. However, this can vary depending on the specific application and the operating conditions.