Part Details for MAX4594EXK+T by Maxim Integrated Products
Results Overview of MAX4594EXK+T by Maxim Integrated Products
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Communication and Networking
MAX4594EXK+T Information
MAX4594EXK+T by Maxim Integrated Products is a Multiplexer or Switch.
Multiplexers or Switches are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for MAX4594EXK+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX4594EXK+TCT-ND
|
DigiKey | IC SWITCH SPST-NOX1 10OHM SC70-5 Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
3585 In Stock |
|
$1.0987 / $2.2100 | Buy Now |
|
|
Bristol Electronics | 2120 |
|
RFQ | ||
|
|
Quest Components | 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO5 | 1898 |
|
$0.5775 / $1.3750 | Buy Now |
Part Details for MAX4594EXK+T
MAX4594EXK+T CAD Models
MAX4594EXK+T Part Data Attributes
|
|
MAX4594EXK+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX4594EXK+T
Maxim Integrated Products
SPST, 1 Func, 1 Channel, CMOS, PDSO5, SC-70, 5 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SC-70, 5 PIN | |
| Pin Count | 5 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | SPST | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e3 | |
| Length | 2 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Off-state Isolation-Nom | 80 dB | |
| On-state Resistance-Max (Ron) | 20 Ω | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Switch-off Time-Max | 50 ns | |
| Switch-on Time-Max | 45 ns | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 1.25 mm |
Alternate Parts for MAX4594EXK+T
This table gives cross-reference parts and alternative options found for MAX4594EXK+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX4594EXK+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX4594DCKR | Texas Instruments | $0.4595 | 10-pA on-state leakage current, 5-V, 1:1 (SPST), 1-channel analog switch (active high) 5-SC70 -40 to 85 | MAX4594EXK+T vs MAX4594DCKR |
| MAX4594EXK+T | Analog Devices Inc | Check for Price | Low-Voltage, Single-Supply, 10Ω SPST CMOS Analog Switches, 5-SC70-N/A, 5 Pins, -40 to 85C | MAX4594EXK+T vs MAX4594EXK+T |
| MAX4594DCKRG4 | Texas Instruments | Check for Price | 10-pA on-state leakage current, 5-V, 1:1 (SPST), 1-channel analog switch (active high) 5-SC70 -40 to 85 | MAX4594EXK+T vs MAX4594DCKRG4 |
| MAX4594DCKRE4 | Texas Instruments | Check for Price | 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO5, GREEN, PLASTIC, SC-70, 5 PIN | MAX4594EXK+T vs MAX4594DCKRE4 |
| PI5A4594ACEX | Pericom Semiconductor Corporation | Check for Price | SPST, 1 Func, 1 Channel, CMOS, PDSO5, LEAD FREE, SC-70, 5 PIN | MAX4594EXK+T vs PI5A4594ACEX |
MAX4594EXK+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX4594EXK+T involves keeping the input and output traces separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
-
The MAX4594EXK+T requires a single 3.3V or 5V power supply. It's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirements involve powering up the device in the following order: VCC, then EN (enable) pin. The EN pin should be tied to VCC or a digital output from a microcontroller.
-
The maximum current rating for the MAX4594EXK+T is 100mA. To calculate the power dissipation, use the following formula: Pd = (VIN x IIN) + (VOUT x IOUT), where Pd is the power dissipation, VIN is the input voltage, IIN is the input current, VOUT is the output voltage, and IOUT is the output current.
-
The MAX4594EXK+T has a built-in overcurrent protection feature that limits the output current to 150mA. To implement short-circuit protection, it's recommended to add an external current-sensing resistor in series with the output and use a comparator to monitor the voltage across the resistor. When the voltage exceeds a certain threshold, the comparator output can be used to shut down the device.
-
The thermal derating for the MAX4594EXK+T is 10.4mW/°C. To calculate the junction temperature, use the following formula: TJ = TA + (PD x θJA), where TJ is the junction temperature, TA is the ambient temperature, PD is the power dissipation, and θJA is the junction-to-ambient thermal resistance (125°C/W for the MAX4594EXK+T).