Part Details for MAX4236EUT+T by Maxim Integrated Products
Results Overview of MAX4236EUT+T by Maxim Integrated Products
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX4236EUT+T Information
MAX4236EUT+T by Maxim Integrated Products is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for MAX4236EUT+T
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
MAX4236EUT+TCT-ND
|
DigiKey | IC OPAMP GP 1 CIRCUIT SOT6 Min Qty: 1 Lead time: 13 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
6168 In Stock |
|
$1.6925 / $3.2400 | Buy Now |
|
Bristol Electronics | 2500 |
|
RFQ | ||
|
Quest Components | OP-AMP, 600 UV OFFSET-MAX, 7.5 MHZ BAND WIDTH, PDSO6 | 280 |
|
$1.8500 / $4.0000 | Buy Now |
|
LCSC | Single channel 1pA 0.3V/us 1.7MHz Rail-to-Rail Output 50uV SOT-23-6 Operational Amplifier ROHS | 100 |
|
$1.4049 / $2.3203 | Buy Now |
|
Win Source Electronics | IC OPAMP GP 1.7MHZ RRO SOT23-6 | 13383 |
|
$1.5234 / $2.2857 | Buy Now |
Part Details for MAX4236EUT+T
MAX4236EUT+T CAD Models
MAX4236EUT+T Part Data Attributes
|
MAX4236EUT+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX4236EUT+T
Maxim Integrated Products
Operational Amplifier, 1 Func, 600uV Offset-Max, BICMOS, PDSO6, SOT-23, 6 PIN
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Transferred | |
Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
Part Package Code | SOT-23 | |
Package Description | SOT-23, 6 PIN | |
Pin Count | 6 | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.33.00.01 | |
Amplifier Type | OPERATIONAL AMPLIFIER | |
Architecture | VOLTAGE-FEEDBACK | |
Average Bias Current-Max (IIB) | 0.0005 µA | |
Common-mode Reject Ratio-Nom | 102 dB | |
Frequency Compensation | YES | |
Input Offset Voltage-Max | 600 µV | |
JESD-30 Code | R-PDSO-G6 | |
JESD-609 Code | e3 | |
Length | 2.9 mm | |
Low-Bias | YES | |
Low-Offset | YES | |
Micropower | YES | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 1 | |
Number of Terminals | 6 | |
Operating Temperature-Max | 85 °C | |
Operating Temperature-Min | -40 °C | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | LSSOP | |
Package Equivalence Code | TSOP6,.11,37 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | |
Peak Reflow Temperature (Cel) | 260 | |
Power | NO | |
Programmable Power | NO | |
Qualification Status | Not Qualified | |
Seated Height-Max | 1.45 mm | |
Slew Rate-Nom | 0.3 V/us | |
Supply Current-Max | 0.44 mA | |
Supply Voltage Limit-Max | 6 V | |
Supply Voltage-Nom (Vsup) | 5 V | |
Surface Mount | YES | |
Technology | BICMOS | |
Temperature Grade | INDUSTRIAL | |
Terminal Finish | MATTE TIN | |
Terminal Form | GULL WING | |
Terminal Pitch | 0.95 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Unity Gain BW-Nom | 7500 | |
Voltage Gain-Min | 56200 | |
Wideband | NO | |
Width | 1.625 mm |
Alternate Parts for MAX4236EUT+T
This table gives cross-reference parts and alternative options found for MAX4236EUT+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX4236EUT+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
MAX4236EUT-T | Maxim Integrated Products | Check for Price | Operational Amplifier, 1 Func, 600uV Offset-Max, BICMOS, PDSO6, SOT-23, 6 PIN | MAX4236EUT+T vs MAX4236EUT-T |
MAX4236EUT+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX4236EUT+T involves keeping the input and output traces separate, using a solid ground plane, and placing the device close to the input signal source. Additionally, it's recommended to use a low-ESR capacitor for the bypass capacitor (C1) and to place it as close to the device as possible.
-
The value of the bypass capacitor (C1) depends on the input frequency and the desired level of noise rejection. A general rule of thumb is to choose a capacitor with a value between 0.1uF to 10uF, with a voltage rating that exceeds the maximum input voltage. A higher value capacitor provides better noise rejection, but may increase the startup time.
-
The MAX4236EUT+T can handle input voltages up to 15V, but it's recommended to operate within the specified operating range of 2.7V to 5.5V for optimal performance and to prevent damage to the device.
-
To properly power down the MAX4236EUT+T, ensure that the EN pin is driven low (typically through a logic signal or a switch) and that the input voltage is removed. This will put the device in a low-power shutdown mode, reducing quiescent current and power consumption.
-
The typical quiescent current of the MAX4236EUT+T is around 1.5mA, which is relatively low. This low quiescent current helps to minimize power consumption and reduce heat generation, making the device suitable for battery-powered applications.