Part Details for MAX3485CPA+ by Maxim Integrated Products
Results Overview of MAX3485CPA+ by Maxim Integrated Products
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX3485CPA+ Information
MAX3485CPA+ by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3485CPA+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX3485CPA+-ND
|
DigiKey | IC TRANSCEIVER HALF 1/1 8PDIP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
66 In Stock |
|
$5.0235 / $8.4200 | Buy Now |
|
|
Vyrian | Interface ICs | 57 |
|
RFQ |
Part Details for MAX3485CPA+
MAX3485CPA+ CAD Models
MAX3485CPA+ Part Data Attributes
|
|
MAX3485CPA+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX3485CPA+
Maxim Integrated Products
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8, 0.300 INCH, PLASTIC, DIP-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | DIP | |
| Package Description | 0.300 INCH, PLASTIC, DIP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000002 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e3 | |
| Length | 9.375 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 2 V | |
| Output Characteristics | 3-STATE | |
| Output Low Current-Max | 0.0025 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 90 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 4.572 mm | |
| Supply Current-Max | 2.2 mA | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 35 ns | |
| Width | 7.62 mm |
Alternate Parts for MAX3485CPA+
This table gives cross-reference parts and alternative options found for MAX3485CPA+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX3485CPA+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SP3485CP-L | Sipex Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDIP8, LEAD FREE, PLASTIC, DIP-8 | MAX3485CPA+ vs SP3485CP-L |
| MAX3485EEPA | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8, PLASTIC, DIP-8 | MAX3485CPA+ vs MAX3485EEPA |
| ADM3485EAN | Rochester Electronics LLC | Check for Price | LINE TRANSCEIVER, PDIP8, MO-095AA, PLASTIC, DIP-8 | MAX3485CPA+ vs ADM3485EAN |
| ADM3485EANZ | Analog Devices Inc | Check for Price | IC LINE TRANSCEIVER, PDIP8, MO-095AA, PLASTIC, DIP-8, Line Driver or Receiver | MAX3485CPA+ vs ADM3485EANZ |
MAX3485CPA+ Frequently Asked Questions (FAQ)
-
The MAX3485CPA+ requires careful PCB layout and routing to minimize EMI and ensure reliable operation. Maxim Integrated provides a recommended layout and routing guide in their application note AN1896, which includes guidelines for component placement, trace routing, and grounding.
-
Proper termination is critical for RS-485 applications. The MAX3485CPA+ requires a termination resistor (RTERM) between the Y and Z outputs to match the characteristic impedance of the cable. The recommended termination resistor value is 120 ohms for a 120-ohm cable.
-
The MAX3485CPA+ supports cable lengths up to 4000 feet (1219 meters) at a data rate of 10 Mbps. However, the actual cable length supported depends on the specific application, cable quality, and data rate.
-
The MAX3485CPA+ is designed to handle hot swapping or insertion/removal of cables. However, it's essential to ensure that the cable is properly terminated and the transmitter is disabled during hot swapping to prevent damage to the device.
-
The MAX3485CPA+ has a maximum junction temperature (TJ) of 150°C. To ensure reliable operation, it's essential to provide adequate heat sinking and thermal management to keep the device within its recommended operating temperature range.