Part Details for MAX3373EEKA by Maxim Integrated Products
Results Overview of MAX3373EEKA by Maxim Integrated Products
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
MAX3373EEKA Information
MAX3373EEKA by Maxim Integrated Products is an Other Interface IC.
Other Interface ICs are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3373EEKA
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2156-MAX3373EEKA-ND
|
DigiKey | MAX3373 ESD_PROTECTED, 1 MICROAM Min Qty: 190 Lead time: 1 Weeks Container: Bulk MARKETPLACE PRODUCT |
958 In Stock |
|
$1.5800 | Buy Now |
|
|
Rochester Electronics | ESD Protected, 1 Microamp, 16Mbps, Dual Low-Voltage Level Translator RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 958 |
|
$0.9419 / $1.5200 | Buy Now |
|
|
Win Source Electronics | IC LVL XLTR LV 8MBPS SOT23-8 | 35800 |
|
$0.8667 / $1.1194 | Buy Now |
Part Details for MAX3373EEKA
MAX3373EEKA CAD Models
MAX3373EEKA Part Data Attributes
|
|
MAX3373EEKA
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX3373EEKA
Maxim Integrated Products
Interface Circuit, BICMOS, PDSO8,
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Reach Compliance Code | not_compliant | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 4 Weeks | |
| Interface IC Type | VOLTAGE LEVEL TRANSLATOR | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Moisture Sensitivity Level | 1 | |
| Number of Bits | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.1 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Qualification Status | Not Qualified | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL |
MAX3373EEKA Frequently Asked Questions (FAQ)
-
The MAX3373EEKA is a high-frequency device, and proper layout and placement are crucial for optimal performance. It is recommended to follow the layout guidelines provided in the datasheet, including keeping the input and output traces short and away from each other, using a solid ground plane, and placing the device close to the power source.
-
The MAX3373EEKA has a specific power-up and power-down sequence that must be followed to ensure proper operation. The device should be powered up by applying the input voltage (VIN) before the enable signal (EN), and powered down by removing the enable signal before the input voltage.
-
The MAX3373EEKA can drive a maximum capacitive load of 10nF. Exceeding this limit may cause the device to oscillate or become unstable.
-
The MAX3373EEKA has a maximum junction temperature of 150°C. To ensure reliable operation, it is recommended to keep the device temperature below 125°C by providing adequate heat sinking and airflow. The thermal resistance of the package (θJA) is 45°C/W.
-
The MAX3373EEKA is sensitive to input noise and ripple. It is recommended to use a low-pass filter with a cutoff frequency of around 10kHz to 100kHz to filter out high-frequency noise and ripple. A 10uF ceramic capacitor in parallel with a 10nF ceramic capacitor is a good starting point.