Part Details for MAX3295AUT+T by Maxim Integrated Products
Results Overview of MAX3295AUT+T by Maxim Integrated Products
- Distributor Offerings: (9 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
MAX3295AUT+T Information
MAX3295AUT+T by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3295AUT+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
73Y3539
|
Newark | Rs422/Rs485 Tx, 20Mbps, 3.465V, Sot23-6, Ic Type:Rs422 Transmitter, No. Of Receivers:-, No. Of Transmitters:1, Communication Mode:-, Data Rate Max:20Mbps, Supply Voltage Min:3.135V, Supply Voltage Max:3.465V, Ic Case/Package:Sot-23Rohs Compliant: Yes |Maxim Integrated/analog Devices MAX3295AUT+T RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 13877 |
|
$2.0300 / $5.4900 | Buy Now |
|
DISTI #
MAX3295AUT+TCT-ND
|
DigiKey | IC TRANSCEIVER 1/0 SOT6 Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
9713 In Stock |
|
$2.2070 / $4.0500 | Buy Now |
|
|
Bristol Electronics | 3218 |
|
RFQ | ||
|
|
Quest Components | LINE DRIVER, PDSO6 | 197 |
|
$1.7774 / $4.1016 | Buy Now |
|
|
Quest Components | LINE DRIVER, PDSO6 | 195 |
|
$1.8200 / $3.9000 | Buy Now |
|
|
ComSIT USA | AVAILABLE EU | 80 |
|
RFQ | |
|
DISTI #
SMC-MAX3295AUT+T
|
Sensible Micro Corporation | XMOSFET CMOS RS485/422 TX SOT RoHS: Compliant Min Qty: 25 Lead time: 0 Weeks, 1 Days Date Code: 1713 Container: Tape & Reel | 1246 |
|
RFQ | |
|
|
Vyrian | Interface ICs | 19183 |
|
RFQ | |
|
|
Win Source Electronics | IC DRIVER RS485/422 SOT23-6 | 8097 |
|
$1.3112 / $1.9667 | Buy Now |
Part Details for MAX3295AUT+T
MAX3295AUT+T CAD Models
MAX3295AUT+T Part Data Attributes
|
|
MAX3295AUT+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX3295AUT+T
Maxim Integrated Products
Line Driver, 1 Func, 1 Driver, BICMOS, PDSO6, MO-178, SOT-23, 6 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SOT-23, 6 PIN | |
| Pin Count | 6 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL | |
| Interface IC Type | LINE DRIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G6 | |
| JESD-609 Code | e4 | |
| Length | 2.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 6 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Characteristics | 3-STATE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LSSOP | |
| Package Equivalence Code | TSOP6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | ||
| Seated Height-Max | 1.45 mm | |
| Supply Voltage-Max | 3.465 V | |
| Supply Voltage-Min | 3.135 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 25 ns | |
| Width | 1.625 mm |
Alternate Parts for MAX3295AUT+T
This table gives cross-reference parts and alternative options found for MAX3295AUT+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX3295AUT+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX3295AUT+ | Maxim Integrated Products | Check for Price | Line Driver, 1 Func, 1 Driver, BICMOS, PDSO6, MO-178, SOT-23, 6 PIN | MAX3295AUT+T vs MAX3295AUT+ |
| MAX3295AUT-T | Analog Devices Inc | Check for Price | 20Mbps, +3.3V, SOT23 RS-485/RS-422 Transmitters, 6-SOT_23-N/A, 6 Pins, -40 to 125C | MAX3295AUT+T vs MAX3295AUT-T |
MAX3295AUT+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX3295AUT+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, using a shielded cable for the USB connection and keeping the USB traces away from the analog signals can help minimize EMI.
-
To ensure proper power-up and configuration, follow the recommended power-up sequence, connect the VCC pin to a 3.3V power supply, and tie the EN pin high. Also, make sure to configure the device using the I2C interface and set the desired settings for the USB transceiver, such as the USB speed and mode.
-
The MAX3295AUT+T has a maximum junction temperature of 150°C. To ensure reliable operation, keep the device within the recommended operating temperature range of -40°C to 85°C. Use thermal vias and a heat sink if necessary to dissipate heat, especially in high-power or high-temperature applications.
-
To troubleshoot USB connectivity issues, check the USB cable and connector for damage or corrosion, ensure the device is properly configured and powered, and verify the USB host is functioning correctly. Use a USB protocol analyzer to debug the USB communication and identify any issues with the device or host.
-
The MAX3295AUT+T has built-in ESD protection, but it's still important to follow proper ESD handling procedures when handling the device. Use an ESD wrist strap or mat, and ensure the PCB is designed with ESD protection in mind, such as using ESD-protection diodes and resistors.