Part Details for MAX3245EEAI+T by Analog Devices Inc
Results Overview of MAX3245EEAI+T by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX3245EEAI+T Information
MAX3245EEAI+T by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3245EEAI+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX3245EEAIT
|
Mouser Electronics | RS-232 Interface IC 15kV ESD-Protected, 1 A, 1Mbps, 3.0V to 5.5V, RS-232 Transceivers with AutoShutdown Plus RoHS: Compliant | 1111 |
|
$10.6800 / $15.7900 | Buy Now |
|
|
Analog Devices Inc | ±15kV ESD-Protected, 1µA, 1Mbp Min Qty: 1 Package Multiple: 1 | 113 |
|
$8.5400 / $18.9400 | Buy Now |
Part Details for MAX3245EEAI+T
MAX3245EEAI+T CAD Models
MAX3245EEAI+T Part Data Attributes
|
|
MAX3245EEAI+T
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX3245EEAI+T
Analog Devices Inc
±15kV ESD-Protected, 1µA, 1Mbps, 3.0V to 5.5V, RS-232 Transceivers with AutoShutdown Plus, 28-SSOP-5.3_MM, 28 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 28-SSOP-5.3_MM | |
| Package Description | 5.30 MM, MO-150, SSOP-28 | |
| Pin Count | 28 | |
| Manufacturer Package Code | 28-SSOP-5.3_MM | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 1998-01-03 | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | NO | |
| Driver Number of Bits | 3 | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232; TIA-232; V.24; V.28 | |
| JESD-30 Code | R-PDSO-G28 | |
| JESD-609 Code | e3 | |
| Length | 10.2 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 3 | |
| Number of Terminals | 28 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 10 V | |
| Output Low Current-Max | 0.0016 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Equivalence Code | SSOP28,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receiver Number of Bits | 5 | |
| Seated Height-Max | 1.99 mm | |
| Supply Current-Max | 1 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 5.29 mm |
Alternate Parts for MAX3245EEAI+T
This table gives cross-reference parts and alternative options found for MAX3245EEAI+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX3245EEAI+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM242ARZ | Analog Devices Inc | $5.7658 | High Speed, 5 V, 0.1 µF CMOS RS-232 200kBPS Transceiver with 2 Drivers, 2 Receivers, Shutdown and Enable Pins | MAX3245EEAI+T vs ADM242ARZ |
| ICL3245CAZ-T | Renesas Electronics Corporation | Check for Price | 1mA, +3V to +5.5V, 1Mbps, RS-232 Transceivers with Enhanced Automatic Powerdown, SSOP, /Reel | MAX3245EEAI+T vs ICL3245CAZ-T |
MAX3245EEAI+T Frequently Asked Questions (FAQ)
-
The recommended layout and placement for the MAX3245EEAI+T involves keeping the device away from high-frequency noise sources, using a solid ground plane, and placing the device close to the RS-232 connector. Additionally, it's recommended to use a 0.1uF capacitor between the VCC and GND pins to filter out noise.
-
To ensure reliable operation of the MAX3245EEAI+T in a noisy environment, it's recommended to use a shielded cable, twisted pair wiring, and a common-mode choke to reduce electromagnetic interference (EMI). Additionally, using a ferrite bead or a common-mode filter can help to reduce noise.
-
The maximum cable length supported by the MAX3245EEAI+T depends on the baud rate and the quality of the cable. As a general rule, the maximum cable length is around 50 feet (15 meters) at 9600bps, but it can be shorter at higher baud rates. It's recommended to use a high-quality cable with a shield and twisted pairs to minimize signal degradation.
-
The shutdown mode of the MAX3245EEAI+T can be controlled by the SHDN pin. When the SHDN pin is pulled low, the device enters a low-power shutdown mode, which reduces the power consumption to less than 1uA. To exit shutdown mode, the SHDN pin should be pulled high.
-
The recommended power-up sequence for the MAX3245EEAI+T involves applying power to the VCC pin first, followed by the logic inputs. This ensures that the device powers up correctly and minimizes the risk of latch-up or damage.