Part Details for MAX3096CSE+T by Maxim Integrated Products
Results Overview of MAX3096CSE+T by Maxim Integrated Products
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX3096CSE+T Information
MAX3096CSE+T by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3096CSE+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
73Y3246
|
Newark | Rs422/Rs485 Rx, 10Mbps, 3.6V, Nsoic-16, Ic Type:Rs422/Rs485 Receiver, No. Of Receivers:4Receivers, No. Of Transmitters:-, Communication Mode:-, Data Rate Max:10Mbps, Supply Voltage Min:3.135V, Supply Voltage Max:3.6V Rohs Compliant: Yes |Maxim Integrated/analog Devices MAX3096CSE+T RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 2319 |
|
$4.9700 / $7.2000 | Buy Now |
|
DISTI #
MAX3096CSE+TCT-ND
|
DigiKey | IC TRANSCEIVER 0/4 16SOIC Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
7900 In Stock |
|
$5.1440 / $8.8200 | Buy Now |
|
|
LCSC | Receivers 10Mbps SO-16 RS-485 / RS-422 ICs ROHS | 21 |
|
$12.1845 / $14.9976 | Buy Now |
|
|
Win Source Electronics | IC RS485/422 RX 10MBPS 16-SOIC / Quad Receiver RS-422/RS-485 16-Pin SOIC N T/R | 24691 |
|
$16.8732 / $25.3097 | Buy Now |
Part Details for MAX3096CSE+T
MAX3096CSE+T CAD Models
MAX3096CSE+T Part Data Attributes
|
|
MAX3096CSE+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX3096CSE+T
Maxim Integrated Products
Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16, 0.150 INCH, SOIC-16
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, SOIC-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE RECEIVER | |
| Interface Standard | EIA-422; EIA-423; EIA-485 | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 9.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 123 ns | |
| Receiver Number of Bits | 4 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 4 mA | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for MAX3096CSE+T
This table gives cross-reference parts and alternative options found for MAX3096CSE+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX3096CSE+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX3096CSE+ | Analog Devices Inc | $1.6732 | ±15kV ESD-Protected, 10Mbps, 3V/5V, Quad RS-422/RS-485 Receivers, 16-SOIC_N-150_MIL, 16 Pins, 0 to 70C | MAX3096CSE+T vs MAX3096CSE+ |
| MAX3096ESE | Maxim Integrated Products | $3.4980 | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16, 0.150 INCH, SOIC-16 | MAX3096CSE+T vs MAX3096ESE |
| MAX3096ESE+ | Maxim Integrated Products | $5.3564 | Line Receiver, 4 Func, 4 Rcvr, BICMOS, PDSO16, SOIC-16 | MAX3096CSE+T vs MAX3096ESE+ |
| MAX3096ESE+T | Maxim Integrated Products | Check for Price | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16, 0.150 INCH, SOIC-16 | MAX3096CSE+T vs MAX3096ESE+T |
| MAX3096ESE+T | Analog Devices Inc | Check for Price | ±15kV ESD-Protected, 10Mbps, 3V/5V, Quad RS-422/RS-485 Receivers, 16-SOIC_N-150_MIL, 16 Pins, -40 to 85C | MAX3096CSE+T vs MAX3096ESE+T |
| MAX3096CSE | Maxim Integrated Products | Check for Price | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16, 0.150 INCH, SOIC-16 | MAX3096CSE+T vs MAX3096CSE |
| MAX3096CSE+T | Analog Devices Inc | Check for Price | ±15kV ESD-Protected, 10Mbps, 3V/5V, Quad RS-422/RS-485 Receivers, 16-SOIC_N-150_MIL, 16 Pins, 0 to 70C | MAX3096CSE+T vs MAX3096CSE+T |
| MAX3096CSE-T | Maxim Integrated Products | Check for Price | Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16, 0.150 INCH, SOIC-16 | MAX3096CSE+T vs MAX3096CSE-T |
MAX3096CSE+T Frequently Asked Questions (FAQ)
-
A good PCB layout practice is to keep the signal traces short and away from the power traces. Use a solid ground plane and decouple the power supply with a 10uF capacitor. Additionally, use a shielded cable for the RS-485 bus to reduce EMI.
-
To ensure reliable communication in noisy environments, use a shielded cable, terminate the bus with a 120Ω resistor, and use a common-mode choke to filter out noise. Also, consider using a repeater or an isolator to extend the distance and improve signal integrity.
-
The maximum cable length supported by the MAX3096CSE+T depends on the data rate and the type of cable used. As a general guideline, the maximum cable length is approximately 4000 feet (1219 meters) at 115.2 kbps and 1000 feet (305 meters) at 921.6 kbps.
-
To troubleshoot communication issues, check the signal integrity using an oscilloscope, verify the correct termination and biasing of the bus, and ensure that the transmitter and receiver are properly configured. Also, check for noise and interference on the bus and ensure that the cable is properly shielded and terminated.
-
Yes, the MAX3096CSE+T can be used in a multi-drop configuration. However, it's essential to ensure that the total bus capacitance does not exceed 255pF and that each node is properly terminated with a 120Ω resistor.