Part Details for MAX3081ESA+T by Maxim Integrated Products
Results Overview of MAX3081ESA+T by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (9 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Industrial Automation
Computing and Data Storage
Aerospace and Defense
Healthcare
Renewable Energy
Telecommunications
Automotive
Robotics and Drones
MAX3081ESA+T Information
MAX3081ESA+T by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3081ESA+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX3081ESA+T-ND
|
DigiKey | IC TRANSCEIVER FULL 1/1 8SOIC Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$3.4157 | Buy Now |
Part Details for MAX3081ESA+T
MAX3081ESA+T CAD Models
MAX3081ESA+T Part Data Attributes
|
|
MAX3081ESA+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX3081ESA+T
Maxim Integrated Products
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SO-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SO-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Characteristics | TOTEM-POLE | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 1 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 260 ns | |
| Width | 3.9 mm |
Alternate Parts for MAX3081ESA+T
This table gives cross-reference parts and alternative options found for MAX3081ESA+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX3081ESA+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX3081ESA-T | Maxim Integrated Products | Check for Price | LINE TRANSCEIVER, PDSO8, SOP-8 | MAX3081ESA+T vs MAX3081ESA-T |
MAX3081ESA+T Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the MAX3081ESA+T involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the transmission line. Additionally, it's recommended to use a 50Ω transmission line and to avoid vias and right-angle bends in the signal path.
-
The correct termination resistors for the MAX3081ESA+T depend on the specific application and the impedance of the transmission line. As a general rule, the termination resistors should match the characteristic impedance of the transmission line. For example, if the transmission line has a characteristic impedance of 50Ω, then 50Ω termination resistors should be used.
-
The maximum cable length that can be driven by the MAX3081ESA+T depends on the frequency of the signal, the type of cable, and the signal attenuation. As a general rule, the MAX3081ESA+T can drive cables up to 100 meters in length at frequencies up to 100MHz. However, it's recommended to consult the datasheet and perform simulations to determine the maximum cable length for a specific application.
-
To ensure that the MAX3081ESA+T is properly biased for optimal performance, it's recommended to follow the biasing scheme shown in the datasheet. This typically involves connecting the VCC pin to a 3.3V or 5V power supply, and connecting the VEE pin to ground. Additionally, it's recommended to use a bypass capacitor between the VCC pin and ground to filter out noise and ensure stable operation.
-
The typical power consumption of the MAX3081ESA+T depends on the specific application and the operating frequency. According to the datasheet, the typical power consumption is around 135mW at a supply voltage of 3.3V and an operating frequency of 100MHz. However, it's recommended to consult the datasheet and perform simulations to determine the power consumption for a specific application.