Part Details for MAX293EWE+T by Maxim Integrated Products
Results Overview of MAX293EWE+T by Maxim Integrated Products
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Communication and Networking
Automotive
MAX293EWE+T Information
MAX293EWE+T by Maxim Integrated Products is an Active Filter.
Active Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for MAX293EWE+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX293EWE+T-ND
|
DigiKey | IC FILTER 25KHZ LOWPASS 16SOIC Min Qty: 1000 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$12.8670 | Buy Now |
|
|
Vyrian | Active Filters | 748 |
|
RFQ |
Part Details for MAX293EWE+T
MAX293EWE+T CAD Models
MAX293EWE+T Part Data Attributes
|
|
MAX293EWE+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX293EWE+T
Maxim Integrated Products
Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, PDSO16, SOIC-16
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SOIC-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Active Filter Type | SWITCHED CAPACITOR FILTER | |
| Center or Cutoff Freq Rng-Max | 25 kHz | |
| Center or Cutoff Freq Rng-Min | 0.0001 kHz | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 10.3 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage-Max (Vsup) | -5.5 V | |
| Neg Supply Voltage-Min (Vsup) | -2.375 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Order | 8TH | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Poles and Zeros | 8 AND 0 | |
| Qualification Status | Not Qualified | |
| Response | LOWPASS | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max (Isup) | 22 mA | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 2.375 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transfer Characteristics | ELLIPTIC | |
| Width | 7.5 mm |
Alternate Parts for MAX293EWE+T
This table gives cross-reference parts and alternative options found for MAX293EWE+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX293EWE+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX293CWE+ | Analog Devices Inc | $10.2736 | 8th-Order, Lowpass, Elliptic, Switched-Capacitor Filters, 16-SOIC_W-300_MIL, 16 Pins, 0 to 70C | MAX293EWE+T vs MAX293CWE+ |
| MAX293EWE+ | Analog Devices Inc | $12.1977 | 8th-Order, Lowpass, Elliptic, Switched-Capacitor Filters, 16-SOIC_W-300_MIL, 16 Pins, -40 to 85C | MAX293EWE+T vs MAX293EWE+ |
| MAX293CWE+ | Maxim Integrated Products | Check for Price | Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, PDSO16, SOIC-16 | MAX293EWE+T vs MAX293CWE+ |
| MAX293EWE+ | Maxim Integrated Products | Check for Price | Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, PDSO16, SOIC-16 | MAX293EWE+T vs MAX293EWE+ |
| MAX293EWE | Maxim Integrated Products | Check for Price | Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, PDSO16, SOIC-16 | MAX293EWE+T vs MAX293EWE |
MAX293EWE+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX293EWE+T involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the device close to the power source. Additionally, using a shielded inductor and placing it away from the device can help reduce EMI.
-
To ensure the MAX293EWE+T operates within its recommended operating conditions, make sure to provide a stable input voltage within the recommended range (4.5V to 5.5V), keep the ambient temperature within the recommended range (-40°C to +125°C), and avoid exceeding the maximum current rating (1A).
-
The recommended input capacitor value for the MAX293EWE+T is 1uF to 10uF, with a voltage rating of at least 6.3V. A higher value capacitor can help improve the power supply rejection ratio (PSRR) and reduce output noise.
-
While the MAX293EWE+T is rated for operation up to 125°C, it's essential to consider the device's power dissipation and thermal resistance when operating in high-temperature environments. Ensure proper heat sinking and thermal management to prevent overheating and reduce the risk of device failure.
-
To troubleshoot issues with the MAX293EWE+T, start by verifying the input voltage and current, checking for proper PCB layout and thermal management, and ensuring the device is operated within its recommended conditions. Use an oscilloscope to monitor the output voltage and current, and consult the datasheet and application notes for guidance.