Part Details for MAX20730EPL+T by Analog Devices Inc
Results Overview of MAX20730EPL+T by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
MAX20730EPL+T Information
MAX20730EPL+T by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for MAX20730EPL+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX20730EPL+T
|
Mouser Electronics | Switching Voltage Regulators 25A POL w/PMBUS RoHS: Compliant | 375 |
|
$6.3300 / $8.6400 | Buy Now |
|
|
Analog Devices Inc | 25A POL w/PMBUS Min Qty: 1 Package Multiple: 1 | 1030 |
|
$6.4972 / $9.3000 | Buy Now |
|
|
Vyrian | Other Function Semiconductors | 2021 |
|
RFQ |
Part Details for MAX20730EPL+T
MAX20730EPL+T CAD Models
MAX20730EPL+T Part Data Attributes
|
|
MAX20730EPL+T
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX20730EPL+T
Analog Devices Inc
Integrated, Step-Down Switching Regulator with PMBus, 15-LFCSP-4.15X6X0.95, 15 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 15-LFCSP-4.15X6X0.95 | |
| Pin Count | 15 | |
| Manufacturer Package Code | 15-LFCSP-4.15X6X0.95 | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2017-03-13 | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | ADJ OUTPUT VOLTAGE FROM 0.6V TO 5.5V | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | CURRENT-MODE | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 16 V | |
| Input Voltage-Min | 4.5 V | |
| Input Voltage-Nom | 12 V | |
| JESD-30 Code | R-XBCC-N15 | |
| JESD-609 Code | e3 | |
| Length | 6 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 15 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 50 A | |
| Package Body Material | UNSPECIFIED | |
| Package Code | BCC | |
| Package Shape | RECTANGULAR | |
| Package Style | CHIP CARRIER | |
| Peak Reflow Temperature (Cel) | 260 | |
| Seated Height-Max | 0.955 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 900 kHz | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Position | BOTTOM | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 4.15 mm |
Alternate Parts for MAX20730EPL+T
This table gives cross-reference parts and alternative options found for MAX20730EPL+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX20730EPL+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX20730EPL+ | Maxim Integrated Products | Check for Price | Switching Regulator, | MAX20730EPL+T vs MAX20730EPL+ |
| MAX20745EPL+ | Maxim Integrated Products | Check for Price | Switching Regulator, | MAX20730EPL+T vs MAX20745EPL+ |
MAX20730EPL+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX20730EPL+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals to minimize noise and interference.
-
The MAX20730EPL+T requires a single 3.3V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirements involve powering up the device in the following order: VCC, then EN, and finally the digital inputs. It's also important to ensure that the power supply can provide enough current to support the device's operating current.
-
The recommended clock frequency for the MAX20730EPL+T is 10MHz to 40MHz. The clock frequency affects the device's performance in terms of the sampling rate, bandwidth, and power consumption. A higher clock frequency can provide a higher sampling rate and bandwidth, but it also increases the power consumption.
-
The MAX20730EPL+T has a programmable gain amplifier (PGA) that can be configured for different gain settings using the GAIN[2:0] pins. The gain settings range from 0dB to 30dB in 10dB steps. The gain setting affects the device's input range, noise floor, and linearity. A higher gain setting can provide a higher sensitivity, but it also increases the noise floor and can lead to non-linearity.
-
The MAX20730EPL+T has a built-in anti-aliasing filter that can be configured for different filter settings using the FLT[2:0] pins. The filter settings range from a 1st-order filter to a 4th-order filter. The filter configuration affects the device's bandwidth, noise floor, and group delay. A higher-order filter can provide a better noise rejection, but it also increases the group delay and can lead to signal attenuation.