Part Details for MAX202ECSE-T by Maxim Integrated Products
Results Overview of MAX202ECSE-T by Maxim Integrated Products
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX202ECSE-T Information
MAX202ECSE-T by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX202ECSE-T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 2309 |
|
RFQ | ||
|
|
Quest Components | IC,LINE TRANSCEIVER,2 DRIVER,2 RCVR,SOP,16PIN,PLASTIC | 825 |
|
$2.6850 / $5.3700 | Buy Now |
|
|
Quest Components | IC,LINE TRANSCEIVER,2 DRIVER,2 RCVR,SOP,16PIN,PLASTIC | 21 |
|
$3.8553 / $7.7106 | Buy Now |
|
|
Vyrian | Interface ICs | 665 |
|
RFQ |
Part Details for MAX202ECSE-T
MAX202ECSE-T CAD Models
MAX202ECSE-T Part Data Attributes
|
|
MAX202ECSE-T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX202ECSE-T
Maxim Integrated Products
Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, 0.300 INCH, MS-013AA, SOIC-16
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | 0.300 INCH, MS-013AA, SOIC-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | EXTERNAL CHARGE PUMP | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| High Level Input Current-Max | 0.0002 A | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e0 | |
| Length | 10.3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 10 V | |
| Output Characteristics | TOTEM-POLE | |
| Output Low Current-Max | 0.0032 A | |
| Output Polarity | INVERTED | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 245 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 10000 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max | 15 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm |
Alternate Parts for MAX202ECSE-T
This table gives cross-reference parts and alternative options found for MAX202ECSE-T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX202ECSE-T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ST202ECDR | STMicroelectronics | $0.5864 | 15KV ESD PROTECTED 5V RS-232 TRANSCEIVER, [0oC, 70oC] TEMPERATURE RANGE | MAX202ECSE-T vs ST202ECDR |
| MAX202CSE | Maxim Integrated Products | $2.3729 | Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, SO-16 | MAX202ECSE-T vs MAX202CSE |
| MAX202CSE+ | Analog Devices Inc | $3.2034 | +5V, RS-232 Transceivers with 0.1µF External Capacitors, 16-SOIC_N-150_MIL, 16 Pins, 0 to 70C | MAX202ECSE-T vs MAX202CSE+ |
| TRS202ECDRG4 | Texas Instruments | Check for Price | 5-V Dual RS-232 Line Driver/Receiver With +/-15 kV ESD Protection 16-SOIC 0 to 70 | MAX202ECSE-T vs TRS202ECDRG4 |
| MAX202ICSE-T | Maxim Integrated Products | Check for Price | Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, 0.150 IINCH, MS-012AC, SOIC-16 | MAX202ECSE-T vs MAX202ICSE-T |
| MAX202ICSE+ | Analog Devices Inc | Check for Price | +5V, RS-232 Transceivers with 0.1µF External Capacitors, 16-SOIC_N-150_MIL, 16 Pins, 0 to 70C | MAX202ECSE-T vs MAX202ICSE+ |
| TRS202ECDG4 | Texas Instruments | Check for Price | DUAL LINE TRANSCEIVER, PDSO16, GREEN, PLASTIC, MS-012AC, SOIC-16 | MAX202ECSE-T vs TRS202ECDG4 |
MAX202ECSE-T Frequently Asked Questions (FAQ)
-
The recommended layout and placement for the MAX202ECSE-T involves keeping the device away from high-current carrying traces, using a solid ground plane, and placing bypass capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended. Refer to the Maxim Integrated Products application note AN1991 for more details.
-
The MAX202ECSE-T requires a proper power-up sequence to ensure correct operation. The VCC pin should be powered up first, followed by the VDD pin. The device should be initialized by asserting the EN pin high after the power-up sequence is complete. Refer to the datasheet for the recommended power-up sequence and timing diagrams.
-
The MAX202ECSE-T can support data rates up to 250kbps. However, the actual data rate may be limited by the specific application, PCB layout, and noise environment. It is recommended to consult the datasheet and application notes for more information on data rate limitations.
-
The MAX202ECSE-T has built-in ESD protection, but it is still recommended to follow proper ESD handling procedures during manufacturing and assembly. This includes using ESD-safe materials, grounding wrist straps, and using ESD-protected workstations. Refer to the Maxim Integrated Products application note AN883 for more information on ESD protection.
-
The MAX202ECSE-T has an operating temperature range of -40°C to +85°C. However, the device may not operate within specifications at the extreme ends of this range. It is recommended to consult the datasheet for more information on temperature-related specifications and limitations.