Part Details for MAX202CSE+ by Maxim Integrated Products
Results Overview of MAX202CSE+ by Maxim Integrated Products
- Distributor Offerings: (13 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX202CSE+ Information
MAX202CSE+ by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX202CSE+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
81Y9287
|
Newark | Txrx, Rs232, 120Kbps, 70Degc, Nsoic-16, Ic Type:Rs232 Transceiver, No. Of Receivers:2Receivers, No. Of Transmitters:2, Communication Mode:-, Data Rate Max:120Kbps, Supply Voltage Min:4.5V, Supply Voltage Max:5.5V, No. Of Pins:16Pins Rohs Compliant: Yes |Maxim Integrated/analog Devices MAX202CSE+ RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 0 Container: Bulk | 317 |
|
$3.2500 / $4.0700 | Buy Now |
|
DISTI #
MAX202CSE+-ND
|
DigiKey | IC TRANSCEIVER FULL 2/2 16SOIC Min Qty: 1 Lead time: 10 Weeks Container: Tube |
1589 In Stock |
|
$3.2435 / $5.7700 | Buy Now |
|
DISTI #
70157115
|
RS | Transceiver, RS-232, +/- 30 V (Max.), 120 kbps (Min.), +/- 8 V (Typ.), 16 Narrow Min Qty: 1 Package Multiple: 1 Container: Bulk | 0 |
|
$5.9900 / $6.8100 | RFQ |
|
|
Bristol Electronics | 45 |
|
RFQ | ||
|
|
Quest Components | IC,LINE TRANSCEIVER,2 DRIVER,2 RCVR,SOP,16PIN,PLASTIC | 72 |
|
$2.3100 / $4.6200 | Buy Now |
|
|
Quest Components | IC,LINE TRANSCEIVER,2 DRIVER,2 RCVR,SOP,16PIN,PLASTIC | 40 |
|
$3.9694 / $5.9541 | Buy Now |
|
|
ComSIT USA | Dual Transmitter/Receiver RS-232 16-Pin SOIC N Tube ECCN: EAR99 RoHS: Compliant |
|
|
RFQ | |
|
|
Chip 1 Exchange | INSTOCK | 200 |
|
RFQ | |
|
|
Greenchips | Date Code: 11+/PH | 664 |
|
$1.7575 / $2.5567 | Buy Now |
|
|
Greenchips | Date Code: 1140/PH | 0 |
|
$1.7575 / $2.5567 | Buy Now |
Part Details for MAX202CSE+
MAX202CSE+ CAD Models
MAX202CSE+ Part Data Attributes
|
|
MAX202CSE+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX202CSE+
Maxim Integrated Products
Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, ROHS COMPLIANT, SO-16
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | ROHS COMPLIANT, SO-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | EXTERNAL CHARGE PUMP | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| High Level Input Current-Max | 0.0002 A | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE DRIVER | |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 9.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 10 V | |
| Output Characteristics | TOTEM-POLE | |
| Output Low Current-Max | 0.0032 A | |
| Output Polarity | INVERTED | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 10000 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 15 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for MAX202CSE+
This table gives cross-reference parts and alternative options found for MAX202CSE+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX202CSE+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX202EESE+ | Maxim Integrated Products | $6.2122 | Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, SO-16 | MAX202CSE+ vs MAX202EESE+ |
MAX202CSE+ Frequently Asked Questions (FAQ)
-
The MAX202CSE+ requires careful layout and placement to minimize noise and ensure proper operation. It is recommended to place the device close to the power source, use a solid ground plane, and keep the analog and digital traces separate. Additionally, it is recommended to use a 0.1uF bypass capacitor between the VCC and GND pins.
-
The MAX202CSE+ requires a single 5V power supply. It is recommended to use a low-dropout linear regulator or a switching regulator with a low noise output to power the device. Additionally, it is recommended to use a 10uF capacitor in parallel with a 0.1uF capacitor between the VCC and GND pins to filter out noise.
-
The MAX202CSE+ can support data rates up to 250kbps. However, the actual data rate may be limited by the specific application and the quality of the transmission line.
-
To troubleshoot issues with the MAX202CSE+, it is recommended to check the power supply voltage, ensure proper grounding, and verify that the device is properly configured. Additionally, it is recommended to use an oscilloscope to check the signal integrity and verify that the device is transmitting and receiving data correctly.
-
The MAX202CSE+ is a standard RS-232 transceiver and is compatible with other RS-232 transceivers. However, it is recommended to verify the compatibility of the specific device with the MAX202CSE+ before using them together.