Part Details for MAX201EWE+ by Maxim Integrated Products
Results Overview of MAX201EWE+ by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (6 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
MAX201EWE+ Information
MAX201EWE+ by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX201EWE+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX201EWE+-ND
|
DigiKey | IC TRANSCEIVER FULL 2/2 16SOIC Min Qty: 1 Lead time: 10 Weeks Container: Tube |
42 In Stock |
|
$8.2587 / $13.3700 | Buy Now |
Part Details for MAX201EWE+
MAX201EWE+ CAD Models
MAX201EWE+ Part Data Attributes
|
|
MAX201EWE+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX201EWE+
Maxim Integrated Products
Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, SO-16
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SO-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | EXTERNAL CHARGE PUMP | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE DRIVER | |
| Interface Standard | EIA-232-E; TIA-232-E; V.28 | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 10.3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 10 V | |
| Output Characteristics | TOTEM-POLE | |
| Output Low Current-Max | 0.0032 A | |
| Output Polarity | INVERTED | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 10000 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 2.65 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Supply Voltage1-Max | 13.2 V | |
| Supply Voltage1-Min | 9 V | |
| Supply Voltage1-Nom | 12 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7.5 mm |
Alternate Parts for MAX201EWE+
This table gives cross-reference parts and alternative options found for MAX201EWE+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX201EWE+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX202CWE+ | Maxim Integrated Products | $4.1718 | Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, ROHS COMPLIANT, SO-16 | MAX201EWE+ vs MAX202CWE+ |
| MAX201CPD+ | Analog Devices Inc | Check for Price | +5V, RS-232 Transceivers with 0.1µF External Capacitors, 14-PDIP-300_MIL, 14 Pins, 0 to 70C | MAX201EWE+ vs MAX201CPD+ |
| MAX201EWE-T | Maxim Integrated Products | Check for Price | Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, SO-16 | MAX201EWE+ vs MAX201EWE-T |
| MAX200EPP | Maxim Integrated Products | Check for Price | Line Transceiver, 5 Func, 5 Driver, CMOS, PDIP20, PLASTIC, DIP-20 | MAX201EWE+ vs MAX200EPP |
| MAX201CPD+ | Maxim Integrated Products | Check for Price | Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDIP14, PLASTIC, DIP-14 | MAX201EWE+ vs MAX201CPD+ |
| MAX202EPE | Maxim Integrated Products | Check for Price | Line Driver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDIP16, PLASTIC, DIP-16 | MAX201EWE+ vs MAX202EPE |
MAX201EWE+ Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the MAX201EWE+ involves placing the device near the input signal source, using a ground plane to reduce noise, and keeping the input and output traces as short as possible. Additionally, it's recommended to use a 0.1uF bypass capacitor between the VCC pin and ground to filter out noise.
-
To ensure the MAX201EWE+ is properly biased, make sure to connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground plane. Additionally, the input signal should be biased to the midpoint of the supply voltage (2.5V) for optimal performance.
-
The maximum input signal amplitude that the MAX201EWE+ can handle is ±5V, which is the same as the supply voltage. Exceeding this amplitude may result in distortion or damage to the device.
-
To reduce EMI and RFI in your design when using the MAX201EWE+, use a shielded enclosure, keep the input and output traces as short as possible, and use a common-mode choke or ferrite bead on the input signal line. Additionally, consider using a low-pass filter or a shielded cable to reduce radiated emissions.
-
The typical power consumption of the MAX201EWE+ is around 10mA, but this can vary depending on the input signal frequency and amplitude. It's recommended to check the datasheet for the specific power consumption characteristics of the device.