Part Details for MAX1674EUA+T by Maxim Integrated Products
Results Overview of MAX1674EUA+T by Maxim Integrated Products
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX1674EUA+T Information
MAX1674EUA+T by Maxim Integrated Products is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for MAX1674EUA+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
73Y2497
|
Newark | Dc/Dc Conv, Sync Boost, 500Khz, Umax-8, No. Of Outputs:1Outputs, Topology:Synchronous Boost (Step Up), Input Voltage Min:700Mv, Input Voltage Max:5.5V, Max Output Current:300Ma, Ic Case/Package:Μmax, No. Of Pins:8Pins Rohs Compliant: Yes |Maxim Integrated/analog Devices MAX1674EUA+T RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 1992 |
|
$3.4200 / $6.2700 | Buy Now |
|
DISTI #
MAX1674EUA+CT-ND
|
DigiKey | IC REG BOOST ADJ 750MA 8UMAX Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
11496 In Stock |
|
$3.2875 / $6.2700 | Buy Now |
|
|
LCSC | Boost type Adjustable 2V5.5V 700mV5.5V MSOP-8 DC-DC Converters ROHS | 144 |
|
$0.9322 / $1.5703 | Buy Now |
|
|
Win Source Electronics | IC REG BST ADJ/PROG 0.75A 8UMAX / Conv DC-DC 0.7V to 5.5V Synchronous Step Up Single-Out 2V to 5.5V/3.3V/5V 0.42A/0.285A 8-Pin uMAX T/R | 19400 |
|
$0.9240 / $1.1935 | Buy Now |
Part Details for MAX1674EUA+T
MAX1674EUA+T CAD Models
MAX1674EUA+T Part Data Attributes
|
|
MAX1674EUA+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX1674EUA+T
Maxim Integrated Products
Switching Regulator, Voltage-mode, 1.5A, 500kHz Switching Freq-Max, PDSO8, UMAX-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | UMAX-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | VOLTAGE-MODE | |
| Control Technique | PULSE FREQUENCY MODULATION | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 1.1 V | |
| Input Voltage-Nom | 2 V | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 1.5 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BOOST | |
| Switching Frequency-Max | 500 kHz | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3 mm |
Alternate Parts for MAX1674EUA+T
This table gives cross-reference parts and alternative options found for MAX1674EUA+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX1674EUA+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX1674EUA-T | Maxim Integrated Products | Check for Price | Switching Regulator, Voltage-mode, 1.5A, 500kHz Switching Freq-Max, PDSO8, UMAX-8 | MAX1674EUA+T vs MAX1674EUA-T |
MAX1674EUA+T Frequently Asked Questions (FAQ)
-
The MAX1674EUA+T is a high-frequency device, and proper layout and placement are crucial. It is recommended to keep the input and output traces as short as possible, and to use a solid ground plane to reduce noise. Additionally, it is recommended to place the device close to the power source and to use a decoupling capacitor between the power pins to reduce noise.
-
The MAX1674EUA+T requires a specific bias voltage and configuration to operate correctly. It is recommended to follow the datasheet's recommended operating conditions and to consult the application notes for specific guidance on biasing and configuration. Additionally, it is recommended to use a voltage regulator to ensure a stable power supply.
-
The MAX1674EUA+T has a maximum junction temperature of 150°C. It is recommended to ensure good airflow around the device, and to use a heat sink if necessary. Additionally, it is recommended to monitor the device's temperature and to implement thermal protection measures to prevent overheating.
-
When troubleshooting the MAX1674EUA+T, it is recommended to check the power supply, input signals, and output signals to ensure they are within the recommended operating conditions. Common pitfalls to avoid include incorrect biasing, inadequate decoupling, and poor layout and placement. It is also recommended to consult the datasheet and application notes for specific guidance on troubleshooting.
-
The MAX1674EUA+T is a high-frequency device and can be susceptible to electromagnetic interference (EMI). It is recommended to follow good EMI/EMC design practices, such as using shielding, filtering, and grounding techniques to minimize emissions and susceptibility. Additionally, it is recommended to consult the datasheet and application notes for specific guidance on EMI/EMC considerations.