Part Details for MAX14776EASA+T by Maxim Integrated Products
Results Overview of MAX14776EASA+T by Maxim Integrated Products
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Energy and Power Systems
Renewable Energy
Robotics and Drones
MAX14776EASA+T Information
MAX14776EASA+T by Maxim Integrated Products is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX14776EASA+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
175-MAX14776EASA+TCT-ND
|
DigiKey | IC TRANSCEIVER HALF 1/1 8SOIC Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
1751 In Stock |
|
$4.7625 / $8.7600 | Buy Now |
|
|
LCSC | transceiver 500Kbps SOIC-8 RS-485 / RS-422 ICs ROHS | 7 |
|
$2.6685 / $2.8119 | Buy Now |
|
|
Win Source Electronics | IC TRANSCEIVER HALF 1/1 8SOIC | 61701 |
|
$1.4851 / $1.9181 | Buy Now |
Part Details for MAX14776EASA+T
MAX14776EASA+T CAD Models
MAX14776EASA+T Part Data Attributes
|
|
MAX14776EASA+T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX14776EASA+T
Maxim Integrated Products
Line Transceiver,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Interface IC Type | LINE TRANSCEIVER | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Peak Reflow Temperature (Cel) | 260 | |
| Terminal Finish | MATTE TIN | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
MAX14776EASA+T Frequently Asked Questions (FAQ)
-
A good PCB layout practice is to keep the analog and digital grounds separate, use a solid ground plane, and keep the power traces away from the analog signals. Additionally, use a common-mode choke or ferrite bead to filter the power supply lines.
-
Follow the power-up sequence recommended in the datasheet, and ensure that the EN pin is high before applying the input voltage. Also, configure the device by writing to the control registers in the correct order, as specified in the datasheet.
-
The maximum input voltage is 5.5V, as specified in the datasheet. Exceeding this voltage may damage the device.
-
Use a logic analyzer or oscilloscope to monitor the input and output signals, and verify that the device is properly configured and powered. Check the datasheet for troubleshooting guidelines and common pitfalls to avoid.
-
The MAX14776EASA+T is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Ensure that the device is properly heat-sinked and follow the recommended thermal design guidelines.