Part Details for MAX13050ASA+T by Analog Devices Inc
Results Overview of MAX13050ASA+T by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Healthcare
MAX13050ASA+T Information
MAX13050ASA+T by Analog Devices Inc is a Network Interface.
Network Interfaces are under the broader part category of Telecommunication Circuits.
A telecommunications circuit transmits and receives information between points. Key components include transmitters, receivers, amplifiers, and multiplexers. Read more about Telecommunication Circuits on our Telecommunication Circuits part category page.
Price & Stock for MAX13050ASA+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX13050ASAT
|
Mouser Electronics | CAN Interface IC Industry-Standard High-Speed CAN Transce RoHS: Compliant | 2246 |
|
$3.6200 / $6.8400 | Buy Now |
|
|
Analog Devices Inc | Industry-Standard High-Speed C Min Qty: 1 Package Multiple: 1 | 1013 |
|
$2.9000 / $8.4100 | Buy Now |
Part Details for MAX13050ASA+T
MAX13050ASA+T CAD Models
MAX13050ASA+T Part Data Attributes
|
|
MAX13050ASA+T
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX13050ASA+T
Analog Devices Inc
Industry-Standard High-Speed CAN Transceivers with ±80V Fault Protection, 8-SOIC_N-150_MIL, 8 Pins, -40 to 125C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 8-SOIC_N-150_MIL | |
| Package Description | 0.150 INCH, LEAD FREE, MS-012AA, SOIC-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 8-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2005-02-24 | |
| Samacsys Manufacturer | Analog Devices | |
| Data Rate | 1000 Mbps | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Transceivers | 1 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Telecom IC Type | CAN TRANSCEIVER | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for MAX13050ASA+T
This table gives cross-reference parts and alternative options found for MAX13050ASA+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX13050ASA+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX13050ASA+T | Maxim Integrated Products | Check for Price | Interface Circuit, 1-Trnsvr, BICMOS, PDSO8, 0.150 INCH, LEAD FREE, MS-012AA, SOIC-8 | MAX13050ASA+T vs MAX13050ASA+T |
MAX13050ASA+T Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX13050ASA+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals to minimize noise and interference.
-
The MAX13050ASA+T requires a single 3.3V power supply, and it's recommended to use a low-noise, low-dropout regulator (LDO) to power the device. The power sequencing requirements involve powering up the device in the following order: VCC, then VREF, and finally the digital inputs. It's also important to ensure that the power supply is stable and within the recommended operating range.
-
The recommended input signal range for the MAX13050ASA+T is 0V to VREF, and the input impedance is typically around 1kΩ. It's recommended to use a signal source with a low output impedance to ensure accurate measurements.
-
The MAX13050ASA+T requires a one-time calibration process to ensure accurate measurements. The calibration process involves applying a known input voltage and adjusting the internal offset and gain registers to achieve the desired accuracy. The calibration requirements involve using a high-precision voltage reference and a stable input signal.
-
The MAX13050ASA+T has a maximum junction temperature of 150°C, and it's recommended to keep the device temperature below 125°C for optimal performance. Thermal management requirements involve using a heat sink or a thermal pad to dissipate heat, and ensuring good airflow around the device.