Part Details for MAX1232CSA-T by Maxim Integrated Products
Results Overview of MAX1232CSA-T by Maxim Integrated Products
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
MAX1232CSA-T Information
MAX1232CSA-T by Maxim Integrated Products is a Power Management Circuit.
Power Management Circuits are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for MAX1232CSA-T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 52 |
|
RFQ | ||
|
|
Bristol Electronics | Min Qty: 2 | 9 |
|
$2.8000 | Buy Now |
|
|
Quest Components | 7 |
|
$2.5000 / $3.7500 | Buy Now | |
|
|
Win Source Electronics | Processor Supervisor 4.62V 1 Active High/Active Low/Open Drain 8-Pin SOIC N T/R / IC VOLT MONITOR PRECISION 8-SOIC | 4620 |
|
$2.4608 / $3.6913 | Buy Now |
Part Details for MAX1232CSA-T
MAX1232CSA-T CAD Models
MAX1232CSA-T Part Data Attributes
|
|
MAX1232CSA-T
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX1232CSA-T
Maxim Integrated Products
Power Supply Support Circuit, Fixed, 1 Channel, +4.37/4.62VV, CMOS, PDSO8, SO-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SO-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | PUSHBUTTON RESET INPUT | |
| Adjustable Threshold | NO | |
| Analog IC - Other Type | VOLTAGE SUPERVISOR | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 245 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max (Isup) | 0.2 mA | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 4.5 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Threshold Voltage-Nom | +4.37/4.62V | |
| Time@Peak Reflow Temperature-Max (s) | 20 | |
| Width | 3.9 mm |
Alternate Parts for MAX1232CSA-T
This table gives cross-reference parts and alternative options found for MAX1232CSA-T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX1232CSA-T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX1232CSA+ | Maxim Integrated Products | $2.2192 | Power Supply Management Circuit, Fixed, 1 Channel, +4.37/4.62VV, CMOS, PDSO8, SO-8 | MAX1232CSA-T vs MAX1232CSA+ |
| DS1232LPS-2 | Dallas Semiconductor | Check for Price | Power Supply Support Circuit, Fixed, 1 Channel, +4.37/4.62VV, CMOS, PDSO8, 0.150 INCH, SOIC-8 | MAX1232CSA-T vs DS1232LPS-2 |
MAX1232CSA-T Frequently Asked Questions (FAQ)
-
The MAX1232CSA-T is a high-speed, high-precision analog-to-digital converter (ADC). To minimize noise and ensure optimal performance, it is recommended to follow a star-grounding scheme, keep analog and digital grounds separate, and use a solid ground plane. Additionally, keep the analog input traces short and away from digital traces, and use a low-impedance source to drive the analog inputs.
-
The MAX1232CSA-T requires a high-speed clock input (up to 64 MHz) to operate. To handle this, use a low-jitter clock source, such as a crystal oscillator or a high-quality clock generator. Route the clock trace as a controlled impedance transmission line, and terminate it with a series resistor to match the impedance of the trace. Additionally, use a clock buffer or repeater if the clock signal needs to be distributed over a long distance.
-
The MAX1232CSA-T requires a well-regulated power supply to operate accurately. Use a low-ESR capacitor (e.g., 0.1 μF) to decouple the power supply pins (VCC and GND) from the analog and digital grounds. Add additional decoupling capacitors (e.g., 10 μF) near the power supply pins to filter out high-frequency noise. Use a power supply with low ripple and noise, and consider using a voltage regulator to regulate the power supply voltage.
-
The MAX1232CSA-T has a parallel output interface that can be connected to a microcontroller or FPGA. Use a register or FIFO to capture the ADC output data, and consider using a dedicated interface IC (e.g., SPI or I2C) to simplify the interface. Ensure that the microcontroller or FPGA can handle the high-speed data transfer rate of the MAX1232CSA-T (up to 64 MHz).
-
The MAX1232CSA-T can dissipate up to 350 mW of power. To manage thermal issues, use a heat sink or thermal pad on the exposed pad of the package, and ensure good airflow around the device. Consider using a thermal interface material (e.g., thermal tape or grease) to improve heat transfer between the device and the heat sink or PCB. Monitor the device temperature and adjust the thermal management strategy as needed.