Part Details for MAX1190ECM+D by Analog Devices Inc
Results Overview of MAX1190ECM+D by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX1190ECM+D Information
MAX1190ECM+D by Analog Devices Inc is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for MAX1190ECM+D
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX1190ECM+D
|
Mouser Electronics | Analog to Digital Converters - ADC Dual 10-Bit, 120Msps, 3.3V, Low-Power AD RoHS: Compliant | 244 |
|
$47.6800 / $63.3500 | Buy Now |
|
|
Analog Devices Inc | Dual 10-Bit, 120Msps, 3.3V, Lo Package Multiple: 1 | 29 |
|
$36.1100 / $68.8200 | Buy Now |
|
|
Rochester Electronics | MAX1190 - Dual 10-Bit, 120Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs RoHS: Compliant Status: Active Min Qty: 1 | 160 |
|
$38.0100 / $47.5100 | Buy Now |
Part Details for MAX1190ECM+D
MAX1190ECM+D CAD Models
MAX1190ECM+D Part Data Attributes
|
|
MAX1190ECM+D
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX1190ECM+D
Analog Devices Inc
Dual 10-Bit, 120Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs, 48-TQFP_EP-7X7X1.0, 48 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 48-TQFP_EP-7X7X1.0 | |
| Package Description | 7 X 7 MM, 1.0 MM HEIGHT, LEAD FREE, MS-026ABA-HD, TQFP-48 | |
| Pin Count | 48 | |
| Manufacturer Package Code | 48-TQFP_EP-7X7X1.0 | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2002-08-15 | |
| Samacsys Manufacturer | Analog Devices | |
| Analog Input Voltage-Max | 1 V | |
| Analog Input Voltage-Min | -1 V | |
| Converter Type | ADC, PROPRIETARY METHOD | |
| JESD-30 Code | S-PQFP-G48 | |
| JESD-609 Code | e3 | |
| Length | 7 mm | |
| Linearity Error-Max (EL) | 0.293% | |
| Moisture Sensitivity Level | 3 | |
| Number of Analog In Channels | 1 | |
| Number of Bits | 10 | |
| Number of Functions | 2 | |
| Number of Terminals | 48 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY | |
| Output Format | PARALLEL, WORD | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TFQFP | |
| Package Equivalence Code | TQFP48,.35SQ | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, THIN PROFILE, FINE PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 120 MHz | |
| Sample and Hold / Track and Hold | TRACK | |
| Seated Height-Max | 1.2 mm | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7 mm |
Alternate Parts for MAX1190ECM+D
This table gives cross-reference parts and alternative options found for MAX1190ECM+D. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX1190ECM+D, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX1190ECM-D | Maxim Integrated Products | Check for Price | ADC, Proprietary Method, 10-Bit, 2 Func, 1 Channel, Parallel, Word Access, CMOS, PQFP48, 7 X 7 MM, 1.0 MM HEIGHT, MS-026ABA-HD, TQFP-48 | MAX1190ECM+D vs MAX1190ECM-D |
| MAX1190ECM-T | Maxim Integrated Products | Check for Price | ADC, Flash Method, 10-Bit, 2 Func, 1 Channel, Parallel, Word Access, CMOS, PQFP48, 7 X 7 MM, 1.0 MM HEIGHT, MS-026ABA-HD, TQFP-48 | MAX1190ECM+D vs MAX1190ECM-T |
MAX1190ECM+D Frequently Asked Questions (FAQ)
-
A good layout and routing practice for the MAX1190ECM+D involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the analog signal traces. Additionally, it's recommended to place the device close to the analog signal sources and to use shielding to reduce electromagnetic interference (EMI).
-
The internal reference voltage and gain settings of the MAX1190ECM+D can be configured using the device's control pins. The datasheet provides a detailed description of the control pin functions and the recommended settings for different applications. Additionally, Analog Devices provides application notes and evaluation boards that can help with configuration and testing.
-
The MAX1190ECM+D can support clock frequencies up to 65MHz. However, the power consumption of the device increases with the clock frequency. To minimize power consumption, it's recommended to use the lowest clock frequency required for the specific application. The datasheet provides a detailed description of the device's power consumption vs. clock frequency.
-
Proper power supply decoupling is critical for the MAX1190ECM+D to prevent noise and oscillations. It's recommended to use a high-quality power supply with low noise and ripple, and to decouple the power supply lines with capacitors (e.g., 10uF and 100nF) as close to the device as possible. Additionally, it's recommended to use a separate analog power supply for the device to prevent digital noise from affecting the analog signals.
-
The MAX1190ECM+D can be synchronized with an external clock or trigger signal using the device's SYNC pin. The SYNC pin can be connected to an external clock or trigger signal, and the device will synchronize its conversion with the rising edge of the SYNC signal. The datasheet provides a detailed description of the SYNC pin function and the recommended synchronization methods.