Part Details for M51995AP by Mitsubishi Electric
Results Overview of M51995AP by Mitsubishi Electric
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
M51995AP Information
M51995AP by Mitsubishi Electric is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for M51995AP
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Win Source Electronics | SWITCHING REGULATOR CONTROL | 5080 |
|
$8.7052 / $13.0573 | Buy Now |
Part Details for M51995AP
M51995AP CAD Models
M51995AP Part Data Attributes
|
|
M51995AP
Mitsubishi Electric
Buy Now
Datasheet
|
Compare Parts:
M51995AP
Mitsubishi Electric
Switching Controller, Voltage-mode, 2A, 500kHz Switching Freq-Max, BIPolar, PDIP16, DIP-16
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MITSUBISHI ELECTRIC CORP | |
| Part Package Code | DIP | |
| Package Description | DIP-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | SWITCHING CONTROLLER | |
| Control Mode | VOLTAGE-MODE | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 35 V | |
| Input Voltage-Min | 12 V | |
| Input Voltage-Nom | 18 V | |
| JESD-30 Code | R-PDIP-T16 | |
| JESD-609 Code | e0 | |
| Length | 19 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -30 °C | |
| Output Current-Max | 2 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP16,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.5 mm | |
| Surface Mount | NO | |
| Switcher Configuration | SINGLE | |
| Switching Frequency-Max | 500 kHz | |
| Technology | BIPOLAR | |
| Temperature Grade | OTHER | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 7.62 mm |
Alternate Parts for M51995AP
This table gives cross-reference parts and alternative options found for M51995AP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of M51995AP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| M51995AP | Renesas Electronics Corporation | Check for Price | 2A SWITCHING CONTROLLER, 500kHz SWITCHING FREQ-MAX, PDIP16, 6.30 X 19 MM, 2.54 MM PITCH, PLASTIC, DIP-16 | M51995AP vs M51995AP |
M51995AP Frequently Asked Questions (FAQ)
-
The recommended operating temperature range for the M51995AP is -40°C to 125°C, with a storage temperature range of -55°C to 150°C.
-
The M51995AP's POR circuitry is designed to reset the device when the power supply voltage (VCC) falls below a certain threshold. To handle POR, ensure a stable power supply, use a capacitor to filter out noise, and consider adding an external reset circuit if necessary.
-
The IVR is used to generate a stable internal voltage (VINT) from the external power supply voltage (VCC). This allows the device to operate reliably and reduces the need for external voltage regulation components.
-
The M51995AP's clock circuitry can be configured using the Clock Control Register (CCR). Set the clock mode, clock source, and clock frequency according to your application's requirements, and ensure proper clock signal routing and termination.
-
When designing the PCB layout, ensure proper signal routing, decoupling, and grounding. Keep sensitive analog signals away from digital signals, and use a solid ground plane to reduce noise and electromagnetic interference (EMI).