Part Details for M25P64-VMF6G by STMicroelectronics
Results Overview of M25P64-VMF6G by STMicroelectronics
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
M25P64-VMF6G Information
M25P64-VMF6G by STMicroelectronics is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for M25P64-VMF6G
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | IC,SERIAL EEPROM,NOR FLASH,8MX8,CMOS,SOP,16PIN,PLASTIC, LEAD FREE | 16 |
|
$12.3600 / $13.9050 | Buy Now |
Part Details for M25P64-VMF6G
M25P64-VMF6G CAD Models
M25P64-VMF6G Part Data Attributes
|
|
M25P64-VMF6G
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
M25P64-VMF6G
STMicroelectronics
8MX8 FLASH 2.7V PROM, PDSO16, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-16
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | SOIC | |
| Package Description | SOP, SOP16,.4 | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Clock Frequency-Max (fCLK) | 50 MHz | |
| Data Retention Time-Min | 20 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | R-PDSO-G16 | |
| Length | 10.3 mm | |
| Memory Density | 67108864 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Number of Words | 8388608 words | |
| Number of Words Code | 8000000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 8MX8 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Programming Voltage | 2.7 V | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.65 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.00005 A | |
| Supply Current-Max | 0.02 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 10 | |
| Type | NOR TYPE | |
| Width | 7.5 mm | |
| Write Cycle Time-Max (tWC) | 15 ms | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for M25P64-VMF6G
This table gives cross-reference parts and alternative options found for M25P64-VMF6G. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of M25P64-VMF6G, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| M25P64-VMF3TPB | Numonyx Memory Solutions | Check for Price | Flash, 8MX8, PDSO16, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-16 | M25P64-VMF6G vs M25P64-VMF3TPB |
| M25P64-VMF6G | Numonyx Memory Solutions | Check for Price | Flash, 8MX8, PDSO16, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-16 | M25P64-VMF6G vs M25P64-VMF6G |
M25P64-VMF6G Frequently Asked Questions (FAQ)
-
The M25P64-VMF6G has a minimum of 100,000 erase cycles, but the actual number of cycles may vary depending on the usage and operating conditions.
-
The HOLD# signal should be kept low during read and write operations to ensure that the device is not put into a hold state, which could cause data corruption or other issues.
-
The recommended clock frequency for the M25P64-VMF6G is up to 50 MHz, but it can operate at frequencies up to 75 MHz with some limitations.
-
The WP# signal should be tied to VCC or left floating to enable write operations. Tying WP# to GND will put the device in write-protect mode, preventing any write operations.
-
The Deep Power-Down (DP) mode is used to reduce power consumption when the device is not in use. In this mode, the device consumes very low power, but it takes longer to wake up and resume normal operation.