Part Details for M25P40-VMP6TGB by Micron Technology Inc
Results Overview of M25P40-VMP6TGB by Micron Technology Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
M25P40-VMP6TGB Information
M25P40-VMP6TGB by Micron Technology Inc is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for M25P40-VMP6TGB
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
M25P40-VMP6TGB
|
Avnet Silica | VFQFPN 8I4 MBIT LOW VOLTAGE SERIAL FLASH MEMORY WITH 40MHZ SPI BUS INTERFACE (Alt: M25P40-VMP6TGB) RoHS: Compliant Min Qty: 4000 Package Multiple: 4000 Lead time: 143 Weeks, 0 Days | Silica - 0 |
|
Buy Now | |
|
DISTI #
M25P40-VMP6TGB
|
EBV Elektronik | VFQFPN 8I4 MBIT LOW VOLTAGE SERIAL FLASH MEMORY WITH 40MHZ SPI BUS INTERFACE (Alt: M25P40-VMP6TGB) RoHS: Compliant Min Qty: 4000 Package Multiple: 4000 | EBV - 0 |
|
Buy Now |
Part Details for M25P40-VMP6TGB
M25P40-VMP6TGB CAD Models
M25P40-VMP6TGB Part Data Attributes
|
|
M25P40-VMP6TGB
Micron Technology Inc
Buy Now
Datasheet
|
Compare Parts:
M25P40-VMP6TGB
Micron Technology Inc
EEPROM, 512KX8, Serial, CMOS, PDSO8, 6 X 5 MM, ROHS COMPLIANT, VFQFPN-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MICRON TECHNOLOGY INC | |
| Part Package Code | QFP | |
| Package Description | VSOP, SOLCC8,.25 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Clock Frequency-Max (fCLK) | 75 MHz | |
| Data Retention Time-Min | 20 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | R-PDSO-G8 | |
| Length | 6 mm | |
| Memory Density | 4194304 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 524288 words | |
| Number of Words Code | 512000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 512KX8 | |
| Output Characteristics | 3-STATE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Equivalence Code | SOLCC8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Programming Voltage | 2.7 V | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.00005 A | |
| Supply Current-Max | 0.015 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Type | NOR TYPE | |
| Width | 5 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for M25P40-VMP6TGB
This table gives cross-reference parts and alternative options found for M25P40-VMP6TGB. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of M25P40-VMP6TGB, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| M25P40-VMP3TG/XA | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 6 X 5 MM, ROHS COMPLIANT, VFQFPN-8 | M25P40-VMP6TGB vs M25P40-VMP3TG/XA |
| M25P40-VMP6TGB | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 6 X 5 MM, VFQFPN-8 | M25P40-VMP6TGB vs M25P40-VMP6TGB |
| M25P40-VMP3TG/4A | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 6 X 5 MM, ROHS COMPLIANT, VFQFPN-8 | M25P40-VMP6TGB vs M25P40-VMP3TG/4A |
| A25L040AQ4-F/Q | AMIC Technology | Check for Price | Flash, 4MX1, PDSO8, 6 X 5 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, WSON-8 | M25P40-VMP6TGB vs A25L040AQ4-F/Q |
| M25P40-VMP6GBA | Micron Technology Inc | Check for Price | Flash, 512KX8, PDSO8, VFDFP-8 | M25P40-VMP6TGB vs M25P40-VMP6GBA |
| M25P40-VMP3PBA | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 6 X 5 MM, ROHS COMPLIANT, VFQFPN-8 | M25P40-VMP6TGB vs M25P40-VMP3PBA |
| M25P40-VMP6P/4 | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 6 X 5 MM, ROHS COMPLIANT, VFQFPN-8 | M25P40-VMP6TGB vs M25P40-VMP6P/4 |
M25P40-VMP6TGB Frequently Asked Questions (FAQ)
-
The M25P40-VMP6TGB has an operating temperature range of -40°C to +85°C, and a storage temperature range of -65°C to +150°C.
-
The HOLD# pin should be pulled high during power-up and power-down sequences to prevent unwanted writes or erases. It's recommended to connect a pull-up resistor to VCC.
-
The M25P40-VMP6TGB supports clock frequencies up to 75 MHz. However, it's recommended to use a clock frequency of 50 MHz or lower for reliable operation.
-
The WP# pin should be pulled high during normal operation to enable write protection. If write protection is not required, the WP# pin can be connected to VCC or left floating.
-
The typical programming time for the M25P40-VMP6TGB is around 10-15 μs per byte, depending on the operating conditions and the specific programming algorithm used.