Part Details for M052LBN by Nuvoton Technology Corp
Results Overview of M052LBN by Nuvoton Technology Corp
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
M052LBN Information
M052LBN by Nuvoton Technology Corp is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for M052LBN
M052LBN CAD Models
M052LBN Part Data Attributes
|
M052LBN
Nuvoton Technology Corp
Buy Now
Datasheet
|
Compare Parts:
M052LBN
Nuvoton Technology Corp
Microcontroller,
|
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | NUVOTON TECHNOLOGY CORP | |
Reach Compliance Code | compliant | |
HTS Code | 8542.31.00.01 | |
Has ADC | YES | |
Address Bus Width | 16 | |
Bit Size | 32 | |
Clock Frequency-Max | 24 MHz | |
DAC Channels | NO | |
DMA Channels | NO | |
External Data Bus Width | 16 | |
Length | 7 mm | |
Number of I/O Lines | 40 | |
Number of Terminals | 48 | |
PWM Channels | YES | |
Package Code | LFQFP | |
Package Shape | SQUARE | |
Package Style | FLATPACK, LOW PROFILE, FINE PITCH | |
Speed | 50 MHz | |
Supply Voltage-Max | 5.5 V | |
Supply Voltage-Min | 2.5 V | |
Supply Voltage-Nom | 3.3 V | |
Surface Mount | YES | |
Terminal Form | GULL WING | |
Terminal Pitch | 0.5 mm | |
Terminal Position | QUAD | |
Width | 7 mm |
Alternate Parts for M052LBN
This table gives cross-reference parts and alternative options found for M052LBN. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of M052LBN, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
M052LBC | Nuvoton Technology Corp | Check for Price | Microcontroller, | M052LBN vs M052LBC |
M052LBN Frequently Asked Questions (FAQ)
-
The M052LBN can operate from -40°C to 105°C, but the datasheet recommends a maximum operating temperature of 85°C for optimal performance and reliability.
-
The M052LBN has multiple clock sources, including an internal RC oscillator, external crystal oscillator, and external clock input. The clock source can be configured using the Clock Control Register (CLKCTL) and the Power Management Control Register (PMCCTL).
-
The maximum current consumption of the M052LBN depends on the operating frequency, voltage, and peripherals used. According to the datasheet, the maximum current consumption is around 35mA at 5V and 48MHz, but this can be reduced to around 10mA in low-power mode.
-
The M052LBN has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WDTCTL). The watchdog timer can be set to reset the microcontroller if it does not receive a reset signal within a specified time period.
-
Yes, the M052LBN has an external memory interface that allows it to access external memory devices such as SRAM, NOR flash, and NAND flash. The external memory interface is controlled by the External Memory Control Register (EMCTL).