Part Details for LTC6240CS5#TRPBF by Linear Technology
Results Overview of LTC6240CS5#TRPBF by Linear Technology
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LTC6240CS5#TRPBF Information
LTC6240CS5#TRPBF by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LTC6240CS5#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Win Source Electronics | IC OPAMP GP 18MHZ RRO TSOT23-5 | 46400 |
|
$4.3532 / $6.5292 | Buy Now |
Part Details for LTC6240CS5#TRPBF
LTC6240CS5#TRPBF CAD Models
LTC6240CS5#TRPBF Part Data Attributes
|
|
LTC6240CS5#TRPBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC6240CS5#TRPBF
Linear Technology
LTC6240 - Single 18MHz, Low Noise, Rail-to-Rail Output, CMOS Op Amp; Package: SOT; Pins: 5; Temperature Range: 0°C to 70°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOT | |
| Package Description | LEAD FREE, PLASTIC, MO-193, TSOT-23, 5 PIN | |
| Pin Count | 5 | |
| Manufacturer Package Code | S5 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.000075 µA | |
| Bias Current-Max (IIB) @25C | 0.000075 µA | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 325 µV | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e3 | |
| Length | 2.9 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VSSOP | |
| Package Equivalence Code | TSOP5/6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH | |
| Packing Method | TAPE AND REEL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1 mm | |
| Slew Rate-Min | 5 V/us | |
| Slew Rate-Nom | 10 V/us | |
| Supply Current-Max | 3.4 mA | |
| Supply Voltage Limit-Max | 7 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 17000 | |
| Voltage Gain-Min | 60000 | |
| Width | 1.625 mm |
Alternate Parts for LTC6240CS5#TRPBF
This table gives cross-reference parts and alternative options found for LTC6240CS5#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC6240CS5#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC6240CS5#TRPBF | Analog Devices Inc | Check for Price | Single 18MHz, Low Noise, Rail-to-Rail Output, CMOS Op Amp | LTC6240CS5#TRPBF vs LTC6240CS5#TRPBF |
LTC6240CS5#TRPBF Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the LTC6240CS5 is dependent on the package and thermal environment. For the TRPBF package, the maximum power dissipation is approximately 1.4W at 25°C ambient temperature, assuming a 4-layer PCB with a thermal pad connected to a copper plane.
-
To minimize noise and ensure optimal performance, follow best practices for op-amp PCB layout: keep the input and output traces short and separate, use a solid ground plane, and place decoupling capacitors close to the power pins. Additionally, consider using a guard ring around the input pins to reduce noise coupling.
-
The recommended decoupling capacitor value is 0.1uF to 1uF, with a voltage rating that exceeds the supply voltage. A low-ESR ceramic capacitor is recommended, such as an X7R or X5R type.
-
Yes, the LTC6240CS5 can be used as a unity-gain buffer. However, ensure that the input signal is within the common-mode range of the op-amp, and that the output is not loaded with a low impedance, as this can affect stability.
-
The LTC6240CS5 has internal ESD protection, but it is still recommended to follow proper ESD handling procedures during assembly and testing. Additionally, consider adding external ESD protection devices, such as TVS diodes or ESD protection arrays, to protect the op-amp from external ESD events.