Part Details for LTC5591IUH#TRPBF by Analog Devices Inc
Results Overview of LTC5591IUH#TRPBF by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC5591IUH#TRPBF Information
LTC5591IUH#TRPBF by Analog Devices Inc is a Cellular Telephone Circuit.
Cellular Telephone Circuits are under the broader part category of Telecommunication Circuits.
A telecommunications circuit transmits and receives information between points. Key components include transmitters, receivers, amplifiers, and multiplexers. Read more about Telecommunication Circuits on our Telecommunication Circuits part category page.
Price & Stock for LTC5591IUH#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC5591IUH#TRPBF-ND
|
DigiKey | IC MIXER 1.3-2.3GHZ 24QFN Min Qty: 2500 Lead time: 39 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$12.7875 | Buy Now |
|
DISTI #
LTC5591IUHTRPBF
|
Richardson RFPD | RF MIXER RoHS: Compliant Min Qty: 1 | 0 |
|
RFQ | |
|
|
Vyrian | Peripheral ICs | 1540 |
|
RFQ |
Part Details for LTC5591IUH#TRPBF
LTC5591IUH#TRPBF CAD Models
LTC5591IUH#TRPBF Part Data Attributes
|
|
LTC5591IUH#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC5591IUH#TRPBF
Analog Devices Inc
Dual 1.3GHz to 2.3GHz High Dynamic Range Downconverting Mixer
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 5 X 5 MM, LEAD FREE, PLASTIC, QFN-24 | |
| Pin Count | 24 | |
| Manufacturer Package Code | 05-08-1747 | |
| Reach Compliance Code | compliant | |
| JESD-30 Code | S-PQCC-N24 | |
| JESD-609 Code | e3 | |
| Length | 5 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 24 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVQCCN | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Telecom IC Type | RF AND BASEBAND CIRCUIT | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | QUAD | |
| Width | 5 mm |
Alternate Parts for LTC5591IUH#TRPBF
This table gives cross-reference parts and alternative options found for LTC5591IUH#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC5591IUH#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC5591IUH#PBF | Analog Devices Inc | Check for Price | Dual 1.3GHz to 2.3GHz High Dynamic Range Downconverting Mixer | LTC5591IUH#TRPBF vs LTC5591IUH#PBF |
LTC5591IUH#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC5591IUH involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing bypass capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended. Refer to the application note AN136 for more details.
-
The LTC5591IUH requires a single 3.3V or 5V supply, and the VCC pin should be bypassed to GND with a 0.1uF capacitor. The device also requires a bias voltage on the VBIAS pin, which can be generated using a resistive divider from the VCC pin. Refer to the datasheet for specific biasing requirements.
-
The LTC5591IUH can handle input powers up to +10dBm, but the maximum input power is dependent on the specific application and frequency of operation. It's recommended to consult the datasheet and application notes for specific guidance on input power handling.
-
Common issues with the LTC5591IUH can be troubleshooted by checking the PCB layout, ensuring proper biasing and supply decoupling, and verifying that the input and output impedances are matched. Additionally, checking for oscillations or instability can be done using a spectrum analyzer or oscilloscope. Refer to the application notes and datasheet for more troubleshooting guidance.
-
The LTC5591IUH is a commercial-grade device, but it can be used in high-reliability or high-temperature applications with proper derating and qualification. Consult the datasheet and application notes for specific guidance on operating temperature range, and consider using a higher-reliability version of the device, such as the LTC5591IUH#TRMPBF, for high-reliability applications.